SXT21410ED16-16.000M

Crystals Overview

The SXT21410ED16-16.000M is a parallel fundamental quartz crystal manufactured by Suntsu Electronics, Inc. It operates at a nominal frequency of 16.000 MHz with a load capacitance of 10 pF. The component features a normal temperature frequency tolerance of ±15 ppm and an equivalent series resistance (ESR) of 200 Ohms maximum. It utilizes a 4-SMD, no lead package for surface mount installation. The device supports fundamental mode operation and is designed for standard electronic timing applications requiring precise frequency generation within its specified electrical parameters.

Crystals Feature Summary

• Compact 4-SMD no-lead surface mount package design
• Fundamental parallel resonance quartz crystal operation
• Defined 10 pF load capacitance specification

Crystals Applications

• General purpose clock signal generation
• Microcontroller oscillator circuits
• Digital communication interface timing

Crystals Procurement Notes

Verify the specific operating temperature range against project requirements, as sources indicate variations between -10°C to 60°C and other ranges. Confirm the ESR value of 200 Ohms matches the circuit drive level constraints. Ensure the 16 MHz frequency aligns with system clock inputs. Cross-reference the exact suffix code ED16 with the manufacturer's current datasheet to confirm stability and tolerance grades before finalizing the bill of materials.

Crystals Selection Notes

Select this component when a 16 MHz fundamental frequency is required in a small form factor. The 10 pF load capacitance must match the oscillator circuit design. Consider the 200 Ohm ESR limit for low-drive applications. This part is suitable for space-constrained designs where a 4-SMD footprint is preferred over larger through-hole or standard SMD crystals.

Crystals Part Context

This model belongs to the SXT214 series from Suntsu Electronics, characterized by a 2.0 x 1.6 mm footprint. The series offers various load capacitances and frequency tolerances. The SXT21410ED16-16.000M specifically denotes the 10 pF load, 16 MHz frequency, and specific tolerance/stability codes defined by the manufacturer's naming convention.

Crystals Replacement Considerations

Direct substitutes require matching 16 MHz frequency, 10 pF load capacitance, and 4-SMD no-lead package. Verify ESR limits and frequency tolerance specifications. Check operating temperature range compatibility. Consult manufacturer cross-reference lists for approved alternatives.