TLV9030QDCKRQ1

Comparators Overview

The TLV9030QDCKRQ1 is a single-channel precision comparator from the TLV903x family, designed for automotive applications. It operates within a supply voltage range of 1.65V to 5.5V and features rail-to-rail inputs with fault tolerance up to 6V. The device provides a push-pull output stage capable of sourcing and sinking current. Key electrical specifications include a typical propagation delay of 100ns, a low quiescent current of 16μA per channel, and an input offset voltage of 300μV. It functions reliably across a temperature range of -40°C to +125°C.

Comparators Feature Summary

• Push-pull output stage capable of driving LEDs or capacitive loads
• Fault-tolerant inputs allowing signals up to 6V without damage
• Precision performance with low input offset voltage and bias current

Comparators Applications

• Appliances
• Building automation
• Factory automation and control
• Motor drives
• Infotainment and cluster systems

Comparators Procurement Notes

Verify the specific ordering suffix matches the required package type and tape-and-reel configuration. Confirm that the component meets AEC-Q100 qualification standards if intended for automotive deployment. Ensure the selected variant aligns with the necessary pinout configuration for the target PCB layout.

Comparators Selection Notes

Select this component when a push-pull output is required for direct drive applications. It is suitable for designs needing high precision with minimal power consumption. Consider the fault-tolerant input capability for environments with potential voltage spikes exceeding the supply rail.

Comparators Part Context

This part belongs to the TLV902x and TLV903x precision comparator family. While the TLV902x variants offer open-drain outputs, the TLV903x series specifically provides push-pull outputs. Both share similar electrical characteristics but differ in output stage architecture and application suitability.

Comparators Replacement Considerations

TLV9031QDCKRQ1 (Alternate Pinout)

Comparators FAQ

What is the maximum input voltage the TLV9030 can tolerate?

The inputs are fault-tolerant and can withstand voltages up to 6V without damage, even if the supply voltage is lower.

Does the TLV9030 have a shutdown mode?

No, the datasheet does not list a shutdown feature for the TLV9030; it operates continuously based on the supply voltage.