1N4003GL-T

Single Diodes Overview

The 1N4003GL-T is a glass passivated silicon rectifier diode manufactured by Diodes Incorporated. It features a DO-41 plastic axial package and supports a peak repetitive reverse voltage of 200 V with an average rectified output current of 1.0 A at 75°C ambient temperature. The device exhibits a maximum forward voltage drop of 1.0 V at 1.0 A and a typical reverse recovery time of 2.0 µs. It withstands non-repetitive peak forward surge currents up to 30 A and operates within a junction temperature range of -65°C to +175°C.

Single Diodes Feature Summary

• Glass passivated die construction for enhanced stability
• High current capability with low forward voltage drop
• Surge overload rating supporting high transient currents

Single Diodes Applications

• General purpose rectification in power supplies
• Polarity protection circuits
• Freewheeling diodes in inductive load switching

Single Diodes Procurement Notes

Verify the specific ordering suffix against official Diodes Incorporated documentation to confirm packaging configuration, as standard designations may vary between tape and reel or cut tape formats. Ensure compliance with RoHS directives and lead-free finish requirements specified in the datasheet before finalizing procurement specifications.

Single Diodes Selection Notes

Select this component when a 200 V blocking voltage and 1 A continuous current rating are required in an axial through-hole package. Consider the 2.0 µs reverse recovery time for general frequency applications rather than high-speed switching. Verify thermal derating curves if operating near the maximum ambient temperature limit of 75°C.

Single Diodes Part Context

This part belongs to the 1N4001G–1N4007G series of 1.0 A glass passivated rectifiers from Diodes Incorporated. The series shares identical mechanical data, including the DO-41 case and tin-plated leads, while differing primarily in their peak repetitive reverse voltage ratings ranging from 50 V to 1000 V.

Single Diodes Replacement Considerations

Cross-reference with other manufacturers' 1N4003 equivalents ensuring matching DO-41 packaging and 200 V reverse voltage ratings. Verify that substitute components meet the same 1.0 A average rectified current and 30 A surge current specifications.

Single Diodes FAQ

What is the typical reverse recovery time for the 1N4003GL-T?

The typical reverse recovery time is 2.0 µs, measured under specific test conditions defined in the datasheet.

Is the 1N4003GL-T suitable for life support devices?

No, Diodes Incorporated products are not authorized for use as critical components in life support devices without express written approval.