402F30033CDT

Crystals Overview

The CTS-Frequency Controls 402F30033CDT is a surface-mount quartz crystal resonator operating at a fundamental frequency of 30 MHz. It features a frequency stability and tolerance of ±30 ppm, ensuring precise timing performance in electronic circuits. The component is designed with an 18 pF load capacitance and exhibits an equivalent series resistance (ESR) of 80 Ohms. Physically, it utilizes a 4-SMD, no-lead package with dimensions of 2.00 mm in length, 1.60 mm in width, and a maximum height of 0.55 mm. This device supports base harmonic operation modes.

Crystals Feature Summary

• Surface-mount design for automated assembly processes
• High frequency stability with ±30 ppm tolerance
• Compliant with RoHS3 environmental standards

Crystals Applications

• Clock signal generation in microcontroller units
• Timing references in communication interfaces
• Frequency control in consumer electronics devices

Crystals Procurement Notes

Verify the specific load capacitance requirement of your circuit against the 18 pF specification to ensure accurate oscillation. Confirm that the PCB footprint matches the 2.00mm x 1.60mm SMD package dimensions. Check for updated availability status as supply chain conditions may vary. Ensure compliance with RoHS3 regulations if required by your product's environmental standards.

Crystals Selection Notes

Select this component when a 30 MHz fundamental frequency with ±30 ppm stability is required. The 18 pF load capacitance must match the oscillator circuit design. Consider the 4-SMD package size for space-constrained applications. Verify the ESR of 80 Ohms aligns with the oscillator driver strength capabilities.

Crystals Part Context

This part belongs to the CTS Frequency Controls crystal resonator family, specifically designed for general-purpose timing applications. It represents a standard surface-mount solution offering reliability and consistent performance across various electronic systems requiring precise clock signals.

Crystals Replacement Considerations

Direct substitutes within the same series or with identical electrical parameters should be verified. Ensure any replacement maintains the 30 MHz frequency, 18 pF load capacitance, and compatible package dimensions.