407F35D010M0000

Crystals Overview

The CTS-Frequency Controls part number 407F35D010M0000 is a surface-mount crystal component designed for precision timing applications. It operates at a fundamental frequency of 10 MHz and utilizes an 18 pF load capacitance specification. The device features an equivalent series resistance (ESR) of 60 Ohms, ensuring stable oscillation characteristics within its circuit. The physical package is a 4-SMD, no-lead configuration with a maximum seated height of 0.051 inches (1.30 mm). These specifications define the electrical and mechanical parameters necessary for integration into standard printed circuit board layouts requiring reliable frequency reference signals.

Crystals Feature Summary

• Surface-mount crystal resonator optimized for compact electronic designs
• Fundamental mode operation providing stable 10 MHz frequency output
• Low profile 4-SMD no-lead package suitable for automated assembly processes

Crystals Applications

• General purpose timing circuits in consumer electronics
• Microcontroller clock sources in embedded systems
• Communication interface synchronization modules

Crystals Procurement Notes

Verify the exact load capacitance and ESR requirements against your specific oscillator circuit design before procurement. Ensure that the PCB footprint matches the 4-SMD no-lead package dimensions precisely to avoid soldering defects. Confirm that the operating temperature range aligns with your environmental conditions. Cross-reference the manufacturer's latest datasheet for any updates on recommended soldering profiles or storage conditions to maintain component integrity during assembly.

Crystals Selection Notes

Select this component when a fundamental 10 MHz crystal is required for cost-sensitive, space-constrained applications. The 18 pF load capacitance must match the external capacitors in your circuit to achieve accurate frequency tuning. Consider the 60 Ohm ESR value to ensure compatibility with your oscillator driver's gain margin requirements. This part is suitable for general industrial and commercial use where high-stability oven-controlled performance is not mandatory.

Crystals Part Context

This component belongs to the standard SMD crystal category from CTS-Frequency Controls. It serves as a passive frequency-determining element rather than an active oscillator. Unlike XO modules, it requires an external oscillator circuit to generate a square wave signal. It is distinct from PLL timing modules which offer programmable frequencies. This part provides a fixed, precise frequency reference based on quartz resonance principles.

Crystals Replacement Considerations

Direct substitutes must match the 10 MHz frequency, 18 pF load capacitance, 60 Ohm ESR, and 4-SMD no-lead package. Verify that alternative manufacturers provide identical dimensional tolerances and mounting pad layouts. Ensure that the replacement part meets the same electrical stability and temperature coefficient specifications as the original CTS component.