416F24013ADR

Crystals Overview

The CTS-Frequency Controls 416F24013ADR is a fundamental mode quartz crystal resonator designed for surface-mount applications. It operates at a nominal frequency of 24 MHz with a frequency tolerance of ±10 ppm and a total stability of ±30 ppm over the operating temperature range. The device features an equivalent series resistance (ESR) of 120 Ohms maximum and requires a load capacitance of 18 pF. Packaged in a compact 4-SMD, no-lead form factor measuring 1.60mm x 1.20mm with a maximum height of 0.45mm, it supports base harmonic operation within a -10°C to +60°C temperature range.

Crystals Feature Summary

• Fundamental mode quartz crystal construction for precise frequency generation
• Compact 4-SMD no-lead package suitable for automated surface-mount assembly
• Compliant with RoHS3 standards and REACH regulations

Crystals Applications

• Clock signal generation for microcontrollers and digital logic circuits
• Frequency reference sources for communication modules
• Timing components in consumer electronic devices

Crystals Procurement Notes

Verify the specific suffix 'ADR' corresponds to Tape & Reel packaging when sourcing. Confirm that the required load capacitance matches the circuit design, as this component specifies 18 pF. Ensure the operating temperature range of -10°C to +60°C meets the environmental requirements of the target application. Cross-reference the ESR value of 120 Ohms with oscillator driver strength specifications to prevent over-driving or failure to start.

Crystals Selection Notes

Select this component when a 24 MHz fundamental frequency with ±10 ppm initial tolerance is required. The 120 Ohm ESR dictates compatibility with oscillator circuits capable of driving higher impedance loads. The 18 pF load capacitance requirement must align with the PCB trace and pin capacitance values. Consider the 4-SMD footprint dimensions for board space constraints. Verify that the commercial temperature range suffices for the intended operational environment.

Crystals Part Context

This part belongs to the CTS 416 Series of surface-mount crystals. The series offers various frequencies and tolerances in standardized small packages. The 'A' suffix typically denotes standard tolerance grades, while 'D' indicates tape and reel packaging. This specific model provides a balance of precision and size for general-purpose timing applications.

Crystals Replacement Considerations

Direct parameter-equivalent substitutes include 416F24013ADT, which shares identical electrical specifications but differs in packaging format. Other variants within the 416 series may offer different tolerances or frequencies but require circuit re-evaluation.