429-43-230-41-540000

Headers, Receptacles, Female Sockets Overview

The Mill-Max 429-43-230-41-540000 is a standard socket header featuring a double-row configuration with 30 positions. It utilizes a solder cup termination method designed to accept lead diameters ranging from 0.015 inches to 0.025 inches (0.381 mm to 0.635 mm). The connector operates at a rated voltage of 100 VRMS and 150 VDC, supporting a current rating of 3 Amps. Key electrical specifications include a maximum contact resistance of 10 mΩ and a minimum insulation resistance of 10,000 MΩ. The unit maintains a row pitch of 0.100 inches (2.540 mm) and is packaged in bulk quantities.

Headers, Receptacles, Female Sockets Feature Summary

• Solder cup termination design facilitates direct connection to discrete wires within pluggable interconnect systems.
• Double-row socket architecture provides standardized spacing for high-density circuit board applications.
• Accepts specific lead diameter ranges to ensure secure mechanical retention without additional crimping tools.

Headers, Receptacles, Female Sockets Applications

• Terminating discrete wires into pluggable interconnect systems
• Standard socket header assemblies requiring solder cup connections
• Double-row PCB layouts with 0.100 inch pitch requirements

Headers, Receptacles, Female Sockets Procurement Notes

Verify the exact position count and series designation against official Mill-Max documentation before procurement. Confirm that the solder cup termination type aligns with your assembly process capabilities. Ensure the lead diameter acceptance range matches your wire specifications. Check for any specific packaging or environmental compliance details required by your project standards. Cross-reference the full part number to avoid confusion with similar single-row or different pitch variants.

Headers, Receptacles, Female Sockets Selection Notes

Select this component when a double-row socket header with solder cup termination is required for wire-to-board connections. The 0.100 inch pitch suits standard industrial and commercial electronics layouts. Consider the 3 Amp current rating and 100 VRMS voltage limit for circuit compatibility. Verify that the accepted lead diameter range fits your specific wire gauge requirements. This series is suitable for applications prioritizing direct solder attachment over crimped contacts.

Headers, Receptacles, Female Sockets Part Context

This part belongs to the Mill-Max 429 Series, which specializes in solder cup headers and mating sockets. The series offers a method for terminating discrete wires into pluggable interconnects. These components are designed for standard socket header applications where reliable solder joint formation is critical. The 429 series supports various pin counts and row configurations to accommodate diverse circuit density needs.

Headers, Receptacles, Female Sockets Replacement Considerations

Consult official Mill-Max substitution guides for verified equivalents. Ensure replacement parts maintain identical solder cup termination and double-row geometry. Verify that electrical ratings and lead diameter acceptance ranges match the original specifications exactly.

Headers, Receptacles, Female Sockets FAQ

What is the maximum contact resistance for this socket header?

The maximum contact resistance is specified as 10 mΩ.

Does this component support surface mount or through-hole installation?

This component uses a solder cup termination method designed for connecting discrete wires, not standard PCB surface mount or through-hole pin insertion.