5001IAC148M5000ABI

Oscillators Overview

The Aeonsemi 5001IAC148M5000ABI is a fixed-frequency CMOS crystal oscillator operating at 148.5000 MHz. It utilizes a surface-mount package with six leads and no visible solder balls. The device supports multiple supply voltages, including 1.8V, 2.5V, and 3.3V. It features a standby mode for power-down functionality. The output signal is compatible with standard CMOS logic levels, making it suitable for digital clock distribution in network communication systems.

Oscillators Feature Summary

• Generates a stable 148.5 MHz clock signal using CMOS technology
• Supports flexible voltage operation across 1.8V, 2.5V, and 3.3V rails
• Includes a dedicated standby pin to enable low-power shutdown states

Oscillators Applications

• Network communication equipment requiring precise timing references
• Digital signal processing (DSP) system clock generation
• Mixed-signal circuit synchronization in analog front-ends

Oscillators Procurement Notes

Verify the component authenticity by checking manufacturer markings against official Aeonsemi documentation. Confirm that the received part matches the specific suffix ABI and corresponds to the 6-SMD no-lead package configuration. Ensure storage conditions comply with moisture sensitivity level requirements for surface-mount devices prior to reflow soldering.

Oscillators Selection Notes

Select this oscillator when a fixed frequency of 148.5 MHz is required for network applications. Consider the CMOS output compatibility with downstream logic families. Evaluate the need for standby control if power management is critical. Compare physical dimensions against available PCB footprint constraints for the 6-SMD package type.

Oscillators Part Context

This component belongs to the Aeonsemi 5001 series of silicon oscillators designed for network communication applications. The company focuses on analog, mixed-signal, and DSP-centric products. This specific model provides a standard fixed-frequency output rather than programmable or temperature-compensated variants found in other series.

Oscillators Replacement Considerations

Direct substitutes must match the 148.5 MHz frequency, CMOS output type, and 6-SMD package. Verify voltage compatibility for 1.8V, 2.5V, and 3.3V operations. Check pinout definitions to ensure interchangeability without circuit modification.