7W-14.7456MBB-T

Oscillators Overview

The TXC Corporation 7W-14.7456MBB-T is a standard CMOS clock oscillator operating at a frequency of 14.7456 MHz. It features a frequency stability of 50 ppm and requires a supply voltage ranging from 2.97 V to 3.63 V. The device utilizes a 15 pF load capacitance and operates within a temperature range of -10°C to +70°C. It is housed in a 7 mm x 5 mm SMD/SMT package with a height of 1.3 mm.

Oscillators Feature Summary

• Generates a precise 14.7456 MHz clock signal using CMOS output format for digital circuit synchronization.
• Provides stable frequency performance with 50 ppm tolerance across the specified industrial temperature range.
• Designed for surface-mount assembly in compact electronic systems requiring reliable timing references.

Oscillators Applications

• Standard clock generation for digital logic circuits
• Timing reference for communication interfaces
• System clock source for embedded microcontrollers

Oscillators Procurement Notes

This component is listed as End-of-Life (EOL) by the manufacturer. Verification of current availability through authorized distributors or secondary market suppliers is required before procurement planning. Ensure that any sourced units match the original datasheet specifications to maintain system compatibility.

Oscillators Selection Notes

Select this part when a 14.7456 MHz CMOS oscillator with 50 ppm stability is required. Verify that the application environment stays within the -10°C to +70°C operating range. Confirm that the 3.3V nominal supply voltage aligns with the system power design and that the 7x5mm footprint fits the PCB layout constraints.

Oscillators Part Context

The 7W series represents TXC Corporation's line of standard crystal oscillators. This specific model belongs to the 7W family, which typically offers CMOS outputs and moderate stability suitable for general-purpose timing applications in consumer and industrial electronics.

Oscillators Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation. Due to the EOL status, alternative components must be evaluated based on matching electrical parameters such as frequency, output type, and package dimensions.