7W-35.328MBA-T

Oscillators Overview

The TXC Corporation 7W-35.328MBA-T is a standard crystal oscillator operating at a rated frequency of 35.328 MHz. It utilizes CMOS output compatibility and requires a rated supply voltage of 3.3V. The device features a frequency stability of ±100 ppm and operates within a temperature range from -40°C to +85°C. It is housed in a 4-pin surface-mount package with dimensions of 7mm x 5mm.

Oscillators Feature Summary

• CMOS output signal compatibility for digital logic integration
• Standard clock oscillator functionality with 3.3V operation
• Surface-mount design suitable for automated assembly

Oscillators Applications

• General purpose clock generation in electronic circuits
• Digital system timing references
• Embedded controller clock sources

Oscillators Procurement Notes

Verify the specific suffix 'B' against official datasheets to confirm pin configuration and enable/disable features, as variations exist within the 7W series. Ensure the required frequency tolerance of ±100 ppm meets system requirements. Confirm RoHS compliance status if environmental regulations apply to the final product assembly.

Oscillators Selection Notes

Select this component when a 35.328 MHz clock signal is required with CMOS output levels. Consider the ±100 ppm stability specification against system jitter requirements. Evaluate the 7mm x 5mm footprint against available PCB space. Compare against other 7W series variants if different supply voltages or stability grades are needed.

Oscillators Part Context

This part belongs to the TXC 7W Series of standard crystal oscillators. The series offers various frequencies and packages. The 7W-35.328MBA-T specifically denotes the 35.328 MHz variant with CMOS output. Similar parts include the 7W-35.328MBB-T and 7W-35.328MBC-T, which may differ in package type or additional features like enable pins.

Oscillators Replacement Considerations

Direct substitutes include the 7W-35.328MBB-T and 7W-35.328MBC-T from TXC Corporation. Verify that the replacement part matches the 3.3V supply requirement and CMOS output type. Check for any differences in pinout or enable functionality between the BA, BB, and BC suffixes before substitution.