7X-100.000MBD-T

Oscillators Overview

The 7X-100.000MBD-T is a standard CMOS crystal oscillator manufactured by TXC Corporation, operating at a frequency of 100 MHz. It features a supply voltage range of 3.3V and supports an enable/disable function for power management. The device utilizes a quartz resonator and is housed in a compact 4-SMD, No Lead package measuring 3.20mm x 2.50mm with a maximum height of 0.039 inches (1.00mm). It offers a frequency stability of ±25ppm and operates within a temperature range of -40°C to +85°C, drawing a maximum current of 30mA.

Oscillators Feature Summary

• Integrates an enable/disable control pin to manage power consumption during idle states.
• Utilizes a quartz crystal resonator for stable signal generation.
• Designed for surface-mount assembly in space-constrained electronic layouts.

Oscillators Applications

• High-speed digital logic circuits requiring precise clock synchronization
• Communication interfaces such as Ethernet or USB controllers
• Microprocessor and microcontroller system clocks

Oscillators Procurement Notes

Verify the specific suffix 'BD' against the manufacturer's official datasheet to confirm the exact voltage tolerance and enable functionality. Ensure that the 3.3V supply requirement aligns with the target circuit design. Confirm RoHS compliance status through the latest production documentation before finalizing procurement orders.

Oscillators Selection Notes

Select this component when a small form factor is required alongside standard CMOS output levels. The ±25ppm stability suits most general-purpose timing applications. Consider the enable feature if dynamic power saving is necessary. Verify that the 3.20mm x 2.50mm footprint matches the PCB silkscreen and copper pad design.

Oscillators Part Context

This part belongs to the 7X series of oscillators from TXC Corporation, which focuses on tight stability and low-profile packaging. The series typically includes variants with different voltages and frequencies, all sharing the same compact SMD footprint to facilitate miniaturization in modern consumer and industrial electronics.

Oscillators Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. Cross-referencing requires matching the 100MHz frequency, 3.3V supply, CMOS output, and 3.2x2.5mm package dimensions with other manufacturers.

Oscillators FAQ

Does the 7X-100.000MBD-T support power-down modes?

Yes, the device includes an enable/disable function that allows the oscillator output to be turned off to reduce power consumption.

What is the physical size of the 7X-100.000MBD-T package?

The oscillator is housed in a 4-SMD, No Lead package with dimensions of 3.20mm in length and 2.50mm in width.