852-10-070-30-001000

Headers, Male Pins Overview

The Mill-Max Manufacturing Corp. model 852-10-070-30-001000 is a precision-machined interconnect component designed for high-reliability applications. This specific part number denotes a header connector with 70 positions, arranged in a single row configuration. The connector utilizes a 0.100-inch (2.54mm) pin spacing to ensure compatibility with standard PCB layouts. It features through-hole termination for secure mechanical attachment and electrical connection. The contact surfaces are gold-plated to provide excellent conductivity and corrosion resistance. The component is rated for a dielectric withstand voltage of 1,000 VRMS minimum, ensuring safety in high-voltage environments. Assembly tolerances are maintained at +/-0.010 inches (.25mm).

Headers, Male Pins Feature Summary

• Precision-machined construction for high reliability.
• Gold-plated contacts for superior conductivity.
• Through-hole termination for secure mounting.
• High dielectric withstand voltage rating.

Headers, Male Pins Applications

• High-voltage circuit board interconnections.
• Industrial control system headers.
• Test and measurement equipment interfaces.
• Aerospace electronic assemblies.

Headers, Male Pins Procurement Notes

Verify the exact pin count and row configuration against the schematic before ordering. Confirm that the required dielectric withstand voltage meets the application's safety standards. Ensure the through-hole footprint on the PCB matches the specified assembly tolerance. Check for any specific plating thickness requirements if the environment is highly corrosive. Validate that the supplier provides official documentation for the 1,000 VRMS rating.

Headers, Male Pins Selection Notes

Select this component when a high-density, single-row header is required for critical signal or power routing. Consider the 0.100-inch spacing for standard PCB design rules. Evaluate the need for gold plating versus tin based on the mating cycle and environmental exposure. Assess the thermal management capabilities if the current load approaches the rated limits. Compare against other Mill-Max series for cost-performance balance.

Headers, Male Pins Part Context

This part belongs to the Mill-Max 852 series, which focuses on precision headers and interconnects. The series is known for its robust construction and adherence to strict manufacturing tolerances. The 852 series is often used in applications where standard connectors may not provide sufficient reliability or voltage isolation. It complements other Mill-Max products like spring-loaded pins and IC sockets by offering fixed, high-reliability connections.

Headers, Male Pins Replacement Considerations

Direct substitutes must match the 70-position count, 0.100-inch pitch, and through-hole termination. Verify that any alternative offers equivalent dielectric withstand voltage. Check if the contact material and plating are compatible with the mating connector. Ensure the physical dimensions and mounting hole patterns are identical to avoid PCB redesign.

Headers, Male Pins FAQ

What is the minimum dielectric withstand voltage for this connector?

The component is rated for a minimum dielectric withstand voltage of 1,000 VRMS.

Does this connector support hot-swapping?

No, this is a fixed through-hole header. Hot-swapping typically requires spring-loaded pogo pins or specialized receptacles.

What is the assembly tolerance for this part?

The assembly tolerance is specified as +/-0.010 inches (.25mm).