A-WBP-S001DA-20TP01

Headers, Male Pins Overview

The A-WBP-S001DA-20TP01 is a male pin header connector manufactured by Assmann WSW Components. It features a 20-position configuration with a 4.20mm row spacing, designed for wire-to-board wafer applications. The component utilizes brass contacts and polyamide (PA66) insulation material. It supports an operating temperature range of -25°C to 85°C and carries a voltage rating of 600VAC/DC with a current rating of 7A.

Headers, Male Pins Feature Summary

• Male pin header design for wire-to-board connections
• Polyamide (PA66) insulation material construction
• Supports high voltage ratings up to 600VAC/DC

Headers, Male Pins Applications

• Wire-to-board interconnect systems
• Wafer connector assemblies
• Electronic device internal wiring

Headers, Male Pins Procurement Notes

Verify the exact part number against manufacturer documentation to ensure compatibility with specific board layouts and mating connectors. Confirm that the 4.20mm spacing aligns with your PCB footprint requirements. Check for any specific surface finish options if tin plating is required for solderability or corrosion resistance in your application environment.

Headers, Male Pins Selection Notes

Select this component when a 20-position male header is required for wire-to-board applications. Ensure the 4.20mm pitch matches the design specifications. Consider the 7A current rating and 600VAC/DC voltage rating to verify suitability for the electrical load. Verify that the PA66 insulation material meets thermal and mechanical requirements for the intended operating temperature range.

Headers, Male Pins Part Context

This connector belongs to the A-WBP series from Assmann WSW Components, which specializes in standard and custom tailored connectors. The series includes various position counts and configurations for wire-to-board applications. Similar parts in this family include the A-WBP-S001DA-02TP01 and A-WBP-S001DA-18TP01, differing primarily in the number of positions while maintaining consistent spacing and material properties.

Headers, Male Pins Replacement Considerations

Direct substitutes within the same series include other position variants like A-WBP-S001DA-18TP01 or A-WBP-S001DA-02TP01 if fewer positions are acceptable. Cross-brand replacements must match the 4.20mm pitch, 20-position count, and male pin configuration. Verify that alternative components meet the same 7A current and 600VAC/DC voltage ratings.