ADC1004S030TS/C1:1

Analog To Digital Converters (ADC) Overview

The ADC1004S030TS/C1:1 is a single-channel, 10-bit Analog-to-Digital Converter (ADC) from NXP USA Inc., designed for high-speed and low-power applications. It converts analog input signals into 10-bit binary-coded digital outputs at a maximum sampling rate of 30 MHz. The device features TTL and CMOS compatible digital inputs and outputs, with an external reference voltage regulator requirement. Key electrical parameters include a typical power dissipation of 175 mW, an effective number of bits (ENOB) of 9.4 bits at a 4.43 MHz full-scale input frequency with a 40 MHz clock, and no missing codes guaranteed. It operates with analog supply voltages between 4.75 V and 5.25 V.

Analog To Digital Converters (ADC) Feature Summary

• 10-bit resolution with a maximum sampling rate of 30 MHz
• High signal-to-noise ratio achieving 9.4 effective bits at 4.43 MHz input
• Low power dissipation of 175 mW (typical)
• TTL and CMOS compatible digital interfaces with In-Range (IR) output

Analog To Digital Converters (ADC) Applications

• Video data digitizing
• Radar systems
• Transient signal analysis
• Medical imaging
• Global Positioning System (GPS) receivers

Analog To Digital Converters (ADC) Procurement Notes

Verify the specific suffix C1:1 against official documentation to confirm package variant or tape-and-reel specifications, as standard ordering information lists the base part ADC1004S030TS in SSOP28. Confirm current product status, as datasheet revisions indicate potential changes over time. Ensure compatibility with external reference ladder requirements, as internal regulators are not included in this family member.

Analog To Digital Converters (ADC) Selection Notes

Select the ADC1004S030TS when a 30 MHz sampling rate suffices for the application, offering lower power consumption compared to higher-speed variants like the S040 or S050. Use this component if the design requires an external reference voltage source rather than an internal regulator; otherwise, consider the ADC1003S series. Ensure the system can provide separate decoupling for analog (VCCA) and digital (VCCD) supplies to maintain performance.

Analog To Digital Converters (ADC) Part Context

This component belongs to the ADC1004S030/040/050 family of single 10-bit ADCs. The '030' designation specifically indicates a maximum clock frequency of 30 MHz, distinguishing it from the 40 MHz and 50 MHz versions within the same pin-compatible family. All members share identical packaging (SSOP28) and functional blocks but differ in speed capabilities.

Analog To Digital Converters (ADC) Replacement Considerations

Pin-to-pin compatible alternatives include the ADC1003S030, which integrates an internal voltage regulator. Other family members such as the ADC1004S040TS and ADC1004S050TS offer higher sampling rates (40 MHz and 50 MHz respectively) while maintaining the same interface and package.