BAS116DYX

Diode Arrays Overview

The BAS116DYX is a low-leakage dual switching diode manufactured by Nexperia. It utilizes an epitaxial medium-speed design with electrical isolation between the two internal diodes, housed in a compact SOT363-3 (SC-88) surface-mounted package. The device supports a continuous reverse voltage of 75 V and a repetitive peak reverse voltage of 85 V per diode. Maximum forward current is rated at 200 mA continuously, with a non-repetitive peak surge capability of 1.5 A. Reverse leakage current is limited to 5 nA at 75 V. Typical reverse recovery time is 0.8 µs, with a maximum of 3 µs. Total power dissipation is 270 mW.

Diode Arrays Feature Summary

• Dual configuration with electrical isolation between diodes
• Low leakage current for sensitive circuit applications
• Compact SOT363-3 surface-mount package

Diode Arrays Applications

• Low-leakage current applications in surface mounted circuits

Diode Arrays Procurement Notes

Verify the specific ordering suffix against the manufacturer's official documentation to confirm the exact packaging format and reel specifications. Confirm that the component version matches the required SOT363-3 package variant rather than older revisions. Ensure compatibility with standard reflow soldering profiles defined for this plastic surface-mounted package type.

Diode Arrays Selection Notes

Select this component when space constraints require a dual-diode solution within a six-lead ultra-small footprint. The electrical isolation feature distinguishes it from common cathode or anode configurations. Evaluate the 0.8 µs typical switching speed against circuit requirements to ensure suitability for medium-speed signal processing tasks.

Diode Arrays Part Context

This component belongs to the Nexperia BAS116 series of small-signal switching diodes. The BAS116DY specifically denotes the dual isolated variant packaged in the SC-88 form factor. This series provides alternatives to single diodes where multiple switching functions are needed in minimal board area.

Diode Arrays Replacement Considerations

BAS116DQ

Diode Arrays FAQ

What is the pin configuration for the BAS116DY?

Pin 1 is Anode 1, Pin 2 is not connected, Pin 3 is Cathode 2, Pin 4 is Anode 2, Pin 5 is not connected, and Pin 6 is Cathode 1.

Does the BAS116DY have internal connections between the diodes?

No, the datasheet specifies that the dual diodes are electrically isolated from each other.

What is the maximum junction temperature for this device?

The maximum junction temperature is 150 °C.