SEARCH
— IC芯片 | 连接器 | 传感器 | 被动器件 —
BU7487SF-E2 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Rohm Semiconductor. Its product description is IC CMOS 4 CIRCUIT 14SOP. Review the specifications below when checking this part for your BOM.
The BU7487SF-E2 is a four-channel ground sense high-speed low voltage CMOS operational amplifier manufactured by ROHM Semiconductor. It operates within a supply voltage range of 3 V to 5.5 V, featuring a gain-bandwidth product of 10 MHz and a slew rate of 10 V/µs. The device exhibits an input offset voltage of 1 mV and an input bias current of 1 pA. It delivers an output current of 8 mA per channel with a typical circuit current of 6 mA. Packaged in an SSOP-14 format, it supports operation from -40°C to +105°C.
Verify the specific suffix E2 against the official manufacturer datasheet to confirm compliance with RoHS directives and lead-free status. Ensure the SSOP-14 package dimensions match the target PCB footprint requirements before finalizing procurement decisions.
Select this component when ground-referenced input signals are required without level shifting. The four-channel configuration reduces board space compared to single or dual-channel alternatives. Verify that the 10 MHz bandwidth meets the signal frequency requirements of the specific application design.
This part belongs to the BU748x series of CMOS operational amplifiers designed for low voltage applications. It shares architectural similarities with the BU7486 and BU7485 variants but offers four independent channels. The series is optimized for cost-effective solutions in consumer electronics where power efficiency and signal integrity are critical.
Consult the official ROHM replacement guide for verified substitutes. Direct pin-compatible alternatives may include other members of the BU748x family if channel count differs. Cross-reference specifications carefully to ensure equivalent speed and voltage characteristics.
The input voltage range extends from the negative supply rail (VSS) to approximately 1.4 V below the positive supply rail (VDD).
No, this product is classified as standard grade and is not recommended for use in automotive equipment according to manufacturer guidelines.
Explore related parts through Amplifiers, Linear, Integrated Circuits (ICs), all product categories.

Understand how oscillators generate timing signals, how they differ from crystals, and which frequency, output and stability specs matter when choosing one.
Read More
BU7487SF-E2 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Rohm Semiconductor. Its product description is IC…
Read More
Compare RC, crystal and MEMS oscillator circuits. Check ppm, jitter, load capacitance, startup margin and output compatibility before choosing a clock source.
Read More
BU7487SF-E2 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Rohm Semiconductor. Its product description is IC…
Read More
BU7487SF-E2 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Rohm Semiconductor. Its product description is IC…
Read MoreBU7487SF-E2 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Rohm Semiconductor. Its product description is IC…
Read More
BU7487SF-E2 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Rohm Semiconductor. Its product description is IC…
Read More
Learn what an IMU measures, how accelerometers and gyroscopes work together, why orientation estimates drift, and what to compare.
Read MoreBU7487SF-E2 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Rohm Semiconductor. Its product description is IC…
Read More
BU7487SF-E2 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Rohm Semiconductor. Its product description is IC…
Read More
BU7487SF-E2 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Rohm Semiconductor. Its product description is IC…
Read More
Learn what a battery BMS does, how protection differs from charging, and which pack specifications to check when sourcing BMS components through ChipApex.
Read More