CA3054M96

Instrumentation, Op Amps, Buffer Amps Overview

The CA3054M96 is a dual independent differential amplifier designed for low power applications from DC to 120MHz. It consists of two amplifiers with associated constant current transistors on a common monolithic substrate, utilizing six general-purpose NPN transistors exhibiting low 1/f noise and an fT exceeding 300MHz. The device features independently accessible inputs and outputs, a maximum input offset voltage of ±5mV, and operates within a temperature range of 0°C to 85°C. It is available in a 14-lead SOIC package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Monolithic construction provides close electrical and thermal matching between the two channels.
• Bias and load resistors are omitted to provide maximum application flexibility.
• Features independently accessible inputs and outputs for each differential amplifier.

Instrumentation, Op Amps, Buffer Amps Applications

• Dual Sense Amplifiers
• Dual Schmitt Triggers
• IF Amplifiers (Differential and/or Cascode)
• Product Detectors
• Synchronous Detectors

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify that the ordering suffix M96 corresponds to the tape and reel packaging configuration as specified in the official documentation. Confirm RoHS compliance status and Pb-free plus anneal material sets if required by your manufacturing process. Ensure proper electrostatic discharge handling procedures are followed during component installation.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when matched performance between two channels is critical due to its monolithic substrate construction. It is suitable for applications requiring low 1/f noise and operation up to 120MHz. Consider the absence of internal bias and load resistors when designing external circuitry to maximize flexibility.

Instrumentation, Op Amps, Buffer Amps Part Context

The CA3054 is manufactured by Intersil Corporation and distributed under the Renesas Electronics brand. It belongs to a family of dual independent differential amplifiers optimized for low power consumption. The device is widely used in RF and IF stages where precise channel matching and high-frequency response are necessary.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

CA3054MZ

Instrumentation, Op Amps, Buffer Amps FAQ

What is the purpose of connecting Terminal 10?

Terminal 10 is not used and should be left unconnected.

How must the substrate be connected?

The substrate must be connected to a voltage more negative than any collector voltage to maintain isolation and normal transistor action.