CLC2010ISO8X

Description：IC VOLTAGE FEEDBACK 2 CIRC 8SOIC
Series：-
Mfr：MaxLinear, Inc.
Package：Tape & Reel (TR)

SKU:7956ba490d10 Category: Instrumentation, Op Amps, Buffer Amps Brand: MaxLinear, Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

CLC2010ISO8X is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists MaxLinear, Inc.. Its product description is IC VOLTAGE FEEDBACK 2 CIRC 8SOIC. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for CLC2010ISO8X

Description：IC VOLTAGE FEEDBACK 2 CIRC 8SOIC
Series：-
Mfr：MaxLinear, Inc.
Package：Tape & Reel (TR)
Amplifier Type：Voltage Feedback
Number of Circuits：2
Output Type：Rail-to-Rail
Slew Rate：9V/µs
Gain Bandwidth Product：4 MHz
Current - Input Bias：90 nA
Voltage - Input Offset：1 mV
Current - Supply：62µA (x2 Channels)
Current - Output / Channel：4 mA
Voltage - Supply Span (Min)：2.5 V
Voltage - Supply Span (Max)：5.5 V
Operating Temperature：-40°C ~ 85°C
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SOIC
-3db Bandwidth：3.4 MHz

Instrumentation, Op Amps, Buffer Amps datasheet and documents for CLC2010ISO8X

CLC2010ISO8X

Instrumentation, Op Amps, Buffer Amps Overview

The CLC2010ISO8X is a dual-channel, low-cost, voltage-feedback operational amplifier fabricated on a complementary bipolar process. It operates from a supply range of 2.5V to 5.5V with a typical quiescent current of 70μA per channel. The device features a 7.3MHz unity-gain bandwidth and a 9V/μs slew rate. It provides rail-to-rail output swing and an input common-mode range extending from -0.3V to 3.8V at 5V supplies. The component is housed in an SOIC-8 package and is specified for operation over a temperature range of -40°C to +85°C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Ultra-low power consumption with 70μA supply current per channel
Rail-to-rail output stage with high dynamic performance
Extended common-mode input range without phase reversal
Short-circuit protection with soft saturation recovery

Instrumentation, Op Amps, Buffer Amps Applications

ADC buffer circuits
Active filters
Portable test instruments
Signal conditioning
Medical equipment

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the obsolete status (OBS) before procurement planning. Confirm that the SOIC-8 package matches the design footprint. Ensure the -40°C to +85°C operating range meets environmental requirements. Check for available evaluation boards like CEB006 if layout validation is needed.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this part for applications requiring low power and rail-to-rail output within a 2.5V to 5.5V supply range. It is suitable for buffering signals where 7.3MHz bandwidth is sufficient. Consider the 70μA current draw for battery-powered designs. Verify that the input common-mode range covers the signal levels used in the circuit.

Instrumentation, Op Amps, Buffer Amps Part Context

The CLC2010ISO8X belongs to the Comlinear CLC1010/CLC2010 family of ultra-low power amplifiers. While the CLC1010 is a single-channel version, the CLC2010 integrates two identical channels in one package. Both share the same electrical characteristics and are designed to compete with low-power CMOS amplifiers while offering bipolar performance.