CNY74-2H

$1.05

Description：OPTOISOLTR 5.3KV 2CH TRANS 8-DIP
Series：-
Mfr：Vishay Semiconductor Opto Division
Package：Tube

SKU:d71b68974da0 Category: Transistor, Photovoltaic Output Optoisolators Brand: Vishay Semiconductor Opto Division

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

CNY74-2H is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Vishay Semiconductor Opto Division. Its product description is OPTOISOLTR 5.3KV 2CH TRANS 8-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for CNY74-2H

Description：OPTOISOLTR 5.3KV 2CH TRANS 8-DIP
Series：-
Mfr：Vishay Semiconductor Opto Division
Package：Tube
Number of Channels：2
Voltage - Isolation：5300Vrms
Current Transfer Ratio (Min)：50% @ 5mA
Current Transfer Ratio (Max)：600% @ 5mA
Turn On / Turn Off Time (Typ)：6µs, 5µs
Rise / Fall Time (Typ)：3µs, 4.7µs
Input Type：DC
Output Type：Transistor
Voltage - Output (Max)：70V
Current - Output / Channel：-
Voltage - Forward (Vf) (Typ)：1.3V
Current - DC Forward (If) (Max)：60 mA
Vce Saturation (Max)：500mV
Operating Temperature：-55°C ~ 100°C
Mounting Type：Through Hole
Package / Case：8-DIP (0.300", 7.62mm)
Supplier Device Package：8-DIP

Transistor, Photovoltaic Output Optoisolators datasheet and documents for CNY74-2H

CNY74-2H

Transistor, Photovoltaic Output Optoisolators Overview

The CNY74-2H is a dual-channel optocoupler manufactured by Vishay Semiconductor Opto Division. It integrates a Gallium Aluminum Arsenide (GaAlAs) infrared LED with two silicon NPN phototransistors. The device provides an isolation test voltage of 5000 VRMS and a working voltage of 5300Vrms. The current transfer ratio ranges from a minimum of 50% to a maximum of 600% at a forward current of 5mA. The operating temperature range extends from -55°C to 100°C.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Dual-channel configuration with independent GaAlAs infrared LEDs and silicon NPN phototransistor outputs
High isolation capability with a working voltage of 5300Vrms
Wide operating temperature range supporting industrial environments

Transistor, Photovoltaic Output Optoisolators Applications

Microcontroller input/output isolation
Signal level shifting between different voltage domains
DC level transmission in isolated circuits

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the component status as obsolete before procurement planning. Confirm that the specific package type matches the design requirements, as availability may be limited. Ensure that the electrical parameters meet the system specifications for isolation voltage and current transfer ratio.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when dual-channel isolation is required within a single package. Consider the wide current transfer ratio range for signal integrity. Verify thermal management capabilities given the high operating temperature limit. Ensure the isolation voltage meets the safety standards of the target application.

Transistor, Photovoltaic Output Optoisolators Part Context

The CNY74-2H belongs to the CNY74 family of multichannel optocouplers. It shares the same internal structure as the CNY74-4H but contains only two isolator channels instead of four. This family utilizes GaAlAs LEDs for efficient infrared emission and silicon NPN phototransistors for output switching.