CS3014-FSZ

Description：IC OPAMP GP 2 CIRCUIT 8SOIC
Series：-
Mfr：Cirrus Logic Inc.
Package：Tube

SKU:fc84ee5a2b29 Category: Instrumentation, Op Amps, Buffer Amps Brand: Cirrus Logic Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

CS3014-FSZ is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Cirrus Logic Inc.. Its product description is IC OPAMP GP 2 CIRCUIT 8SOIC. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for CS3014-FSZ

Description：IC OPAMP GP 2 CIRCUIT 8SOIC
Series：-
Mfr：Cirrus Logic Inc.
Package：Tube
Amplifier Type：General Purpose
Number of Circuits：2
Output Type：Rail-to-Rail
Slew Rate：0.25V/µs
Gain Bandwidth Product：-
Current - Input Bias：170 pA
Voltage - Input Offset：10 µV
Current - Supply：1mA
Current - Output / Channel：-
Voltage - Supply Span (Min)：2.7 V
Voltage - Supply Span (Max)：5 V
Operating Temperature：-40°C ~ 125°C
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SOIC
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for CS3014-FSZ

CS3014-FSZ

Instrumentation, Op Amps, Buffer Amps Overview

The CS3014-FSZ is a dual precision operational amplifier manufactured by Cirrus Logic, housed in an 8-lead SOIC package. It operates on supply voltages from 2.7 V to 5 V with a typical supply current of 1.0 mA. Key electrical characteristics include a maximum input offset voltage of ±20 µV and a maximum average input offset drift of ±0.05 µV/°C. The device provides a typical open-loop voltage gain of 135 dB and exhibits low noise performance with a density of 22 nV/√Hz at 1 Hz and 1 kHz.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Features rail-to-rail inputs and outputs capable of swinging within 20 mV of the supply rails
Designed for precision amplification of low-level signals with excellent offset stability
Exhibits high common-mode rejection ratio (CMRR) and power supply rejection ratio (PSRR)

Instrumentation, Op Amps, Buffer Amps Applications

Thermocouple and thermopile amplifiers
Load cell and bridge transducer amplifiers
Precision instrumentation circuits
Battery-powered systems

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify that the specific part number suffix matches the required package type and environmental compliance. The 'Z' suffix indicates lead-free construction. Confirm the operating temperature range requirements align with the -40 °C to +125 °C specification provided in the ordering information section of the datasheet.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when low offset voltage and minimal drift are critical for signal integrity. The dual-channel architecture allows for cost-effective implementation in multi-sensor applications. Ensure the system supply voltage remains within the 2.7 V to 5 V range to maintain specified performance parameters.

Instrumentation, Op Amps, Buffer Amps Part Context

This device belongs to the CS3004 series of low-power, low-voltage precision amplifiers. It is designed to replace older chopper-stabilized amplifiers while offering lower power consumption and improved noise performance. The family includes variants such as the CS3014-FS and CS3014-FNZ.