DG213DJ-E3

Analog Switches, Multiplexers, Demultiplexers Overview

The DG213DJ-E3 is a quad complementary CMOS analog switch in a 16-pin plastic DIP package. It contains two normally closed and two normally open switches, supporting configurations such as four SPST or two SPDT. The device operates on dual supplies from ±3 V to ±22 V or single supplies up to +40 V. Key electrical parameters include a maximum on-resistance of 60 Ω at room temperature, turn-on time of 130 ns, and turn-off time of 100 ns. It features low leakage current (5 nA max), 30 mA continuous current rating, and operates within a -40 °C to +85 °C temperature range.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

• Supports multiple switching configurations including SPST, SPDT, T-switch, and DPDT using two NC and two NO channels.
• Features improved charge injection compensation design to minimize switching transients.
• Includes an epitaxial layer to prevent latchup and ensures true bi-directional performance in the on condition.

Analog Switches, Multiplexers, Demultiplexers Applications

• Industrial instrumentation
• Test equipment
• Sample-and-hold circuits

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the component against Vishay datasheet document number 70662 to confirm the specific 'D' suffix indicates the 16-pin Plastic DIP package. Ensure the '-E3' suffix aligns with RoHS compliance requirements for the target assembly process. Cross-reference the manufacturer's ordering information table to validate that the part number corresponds to the intended lead-free specification and operating temperature range.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when a quad analog switch with high-voltage capability up to ±22 V is required. The 16-pin DIP package is suitable for through-hole prototyping or legacy board designs. Consider the 60 Ω on-resistance and 130 ns switching speed for general-purpose signal routing applications where these parameters meet the system specifications.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the DG213 series manufactured by Vishay Siliconix. The 'D' suffix specifically denotes the 16-pin Plastic DIP package variant. Other variants in the family include the DG213DY for Narrow SOIC and DG213DQ for TSSOP packages, offering surface-mount alternatives with similar electrical characteristics.

Analog Switches, Multiplexers, Demultiplexers Replacement Considerations

Direct pin-compatible replacements within the same package include DG213DY and DG213DQ. Verify that the alternative package type meets the mechanical constraints of the existing PCB footprint before substitution.

Analog Switches, Multiplexers, Demultiplexers FAQ

What logic levels are compatible with the DG213DJ-E3?

The device features TTL and CMOS compatible logic inputs, requiring a minimum high-level input voltage of 2.4 V and a maximum low-level input voltage of 0.8 V.

How does the DG213DJ-E3 handle signals exceeding supply rails?

Internal diodes clamp signals on the source or drain pins that exceed the V+ or V- supply voltages. The forward diode current must be limited to the maximum current ratings specified in the absolute maximum ratings.

What is the typical charge injection value for this switch?

The typical charge injection is 1 pC under standard test conditions with a load capacitance of 1000 pF and zero gate resistance.