E10PBG

Overview

The Hoffman Enclosures E10PBG is a steel pushbutton enclosure designed for indoor use, offering Type 12 and Type 13 protection ratings. It features a gray finish and measures 24.75 inches in length, 3.25 inches in width, and 2.75 inches in depth. The unit includes ten holes sized for 22.5-mm push buttons and switches. Constructed from 16 or 14 gauge steel, it provides durable housing for industrial control components.

Feature Summary

• Seams are continuously welded and ground smooth for structural integrity
• Captivated cover screws thread into sealed wells to maintain enclosure seal
• Includes bonding provision on the cover and grounding stud on the body

Applications

• Housing 22.5-mm push buttons and switches
• Indoor industrial control panel installations requiring Type 12 protection
• Applications requiring Type 13 dust-tight and oil-tight environments

Procurement Notes

Verify that the specific order includes only the enclosure body and does not assume inclusion of a back panel, as documentation explicitly states the back panel is excluded. Confirm the steel gauge (16 or 14) matches project requirements. Ensure the 22.5-mm hole pattern aligns with selected switch hardware. Check for RoHS compliance status if required by facility standards.

Selection Notes

Select this model when ten 22.5-mm mounting points are necessary for an indoor application. The Type 12 rating makes it suitable for environments with dripping non-corrosive liquids and falling dirt. Consider the E1 series compatibility if standardizing across multiple panel sizes. Verify depth requirements against internal component clearance needs before finalizing selection.

Part Context

This part belongs to the Hoffman E Series, a line of pushbutton enclosures designed for holding various industrial controls. The E10PBG specifically addresses the need for multi-switch layouts in a compact footprint. It is manufactured by nVent Hoffman, continuing the legacy of Hoffman Enclosures. The series emphasizes durability through welded seams and secure fastening mechanisms.

Replacement Considerations

Public confirmed substitute part numbers were not identified in the provided source material.