EL5160IW-T7

Overview

The EL5160IW-T7 is a single-channel current feedback operational amplifier manufactured by Renesas Electronics. It features a -3dB bandwidth of 180 MHz and a slew rate of 1.7 kV/µs. The device operates on a supply voltage range from 5 V to 10 V with a typical supply current of 750 µA per amplifier. Key electrical parameters include an input offset voltage of 1.6 mV, an output current capability of 70 mA, and a common-mode rejection ratio (CMRR) of 62 dB. It incorporates an enable/disable function that reduces supply current to approximately 14 µA when disabled.

Feature Summary

• Integrates an enable and disable control function to significantly reduce power consumption in standby states
• Provides high-speed signal processing capabilities suitable for video and monitor applications
• Operates efficiently from low-voltage single or dual power supplies

Applications

• High-speed video amplifiers
• Portable and handheld battery-powered equipment
• Cable drivers
• RGB amplifiers

Procurement Notes

Verify the specific suffix 'T7' against official Renesas documentation to confirm tape and reel packaging specifications. Confirm RoHS compliance status and moisture sensitivity level prior to procurement. Check for obsolescence notices as this component family may have limited availability or end-of-life status.

Selection Notes

Select this component for designs requiring low power consumption combined with moderate bandwidth. The integrated enable pin makes it suitable for portable devices where power management is critical. Ensure the required bandwidth exceeds 180 MHz is not necessary; otherwise, consider higher-performance variants within the EL51xx series.

Part Context

This part belongs to the EL5160-EL5161 series of low-power current feedback amplifiers. These devices are designed for applications demanding fast settling times and wide bandwidths while maintaining low quiescent current. The series supports both single and dual supply operations, making it versatile for various consumer electronics and test instrumentation systems.

Replacement Considerations

Official substitutes include EL5161IW-T7 for similar performance without the enable feature, or EL5162IWZ-T7 for higher bandwidth requirements. Verify package compatibility and pinout alignment before substitution.