Instrumentation, Op Amps, Buffer Amps EL5362IUZ product image

EL5362IUZ

  • Description:IC OPAMP CFA 3 CIRCUIT 16QSOP
  • Series:-
  • Mfr:Renesas Electronics Corporation
  • Package:Tube

SKU:f2d6be1d020a Category: Brand:

ChipApex WhatsApp

Consult the customer manager about the wholesale price.

consultation hotline:86-132-6715-2157

email:[email protected]
Contact the product manager for consultation. One-stop consultation is available.


Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Submitting!
Submission successful!
Submission failed!
Email error!
Phone number error!

EL5362IUZ is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Renesas Electronics Corporation. Its product description is IC OPAMP CFA 3 CIRCUIT 16QSOP. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for EL5362IUZ

  • Description:IC OPAMP CFA 3 CIRCUIT 16QSOP
  • Series:-
  • Mfr:Renesas Electronics Corporation
  • Package:Tube
  • Amplifier Type:Current Feedback
  • Number of Circuits:3
  • Output Type:-
  • Slew Rate:4000V/µs
  • Gain Bandwidth Product:-
  • Current - Input Bias:2 µA
  • Voltage - Input Offset:1.5 mV
  • Current - Supply:1.5mA (x3 Channels)
  • Current - Output / Channel:100 mA
  • Voltage - Supply Span (Min):5 V
  • Voltage - Supply Span (Max):12 V
  • Operating Temperature:-40°C ~ 85°C (TA)
  • Mounting Type:Surface Mount
  • Package / Case:16-SSOP (0.154", 3.90mm Width)
  • Supplier Device Package:16-QSOP
  • -3db Bandwidth:500 MHz

Instrumentation, Op Amps, Buffer Amps datasheet and documents for EL5362IUZ

EL5362IUZ

Instrumentation, Op Amps, Buffer Amps Overview

The EL5362IUZ is a triple current feedback operational amplifier manufactured by Renesas Electronics. It features a bandwidth of 420 MHz and a slew rate of 2.5 kV/us. The device operates on supply voltages ranging from 5 V to 12 V, with a minimum of 2.5 V for dual supplies. Input offset voltage is specified at 5 mV, while common-mode rejection ratio is 50 dB. Power supply rejection ratio is 65 dB. Operating current is 6 mA per channel. The input voltage noise density is 3 nV/sqrt Hz, and input noise current density is 10 pA. It functions within a temperature range of -40 C to +85 C and is housed in a QSOP-16 package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

  • Triple channel configuration providing three independent high-speed amplifiers in a single package.
  • Current feedback architecture enabling wide bandwidth and fast transient response capabilities.
  • Low power consumption design suitable for battery-operated or thermally constrained applications.

Instrumentation, Op Amps, Buffer Amps Applications

  • Video signal processing circuits
  • High-speed data acquisition systems
  • Test and measurement equipment

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix IUZ to confirm the QSOP-16 package type and industrial temperature rating. Confirm RoHS compliance status through official documentation as requirements may vary by production batch. Check for moisture sensitivity level (MSL) ratings if storage conditions are critical. Ensure the component matches the exact manufacturer part number to avoid pinout or electrical specification mismatches.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when multiple high-speed channels are required in a compact form factor. The current feedback topology is preferred over voltage feedback for applications demanding wide bandwidth without gain-bandwidth product limitations. Consider the 5 mV input offset voltage and 50 dB CMRR for precision requirements. Evaluate the 6 mA operating current against total system power budgets.

Instrumentation, Op Amps, Buffer Amps Part Context

This component belongs to the EL5362 series of high-speed operational amplifiers. It is part of Renesas Electronics' portfolio of video and signal processing integrated circuits. The series includes variants with different packages and performance characteristics. The EL5362 family is designed for applications requiring high linearity and fast settling times.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided source material. Consult official cross-reference tools for parametrically similar components.

EL5362IUZEL5362IUZ

Click on the inquiry

Recent News