F1010T

Overview

The Hoffman F1010T is a 10-inch by 10-inch sweep tee fitting designed for the Lay-In wireway series. Constructed from 14-gauge steel, it features an ANSI 61 gray polyester powder-coated finish. This component provides a 90-degree bend with a large radius to facilitate cable management. It is rated Type 1 and complies with UL 870 and CUL standards. The unit includes removable top and inside covers for access.

Feature Summary

• Provides a 90-degree large radius turn for smooth cable routing
• Features removable top and internal covers for maintenance access
• Constructed from 14-gauge steel with a corrosion-resistant powder coat

Applications

• Indoor electrical cabinet cable management
• Combining multiple wireway sections at right angles
• Mounting against vertical or horizontal surfaces

Procurement Notes

Verify that the required fitment matches the 10.00 x 10.00 inch dimensions of the existing wireway system. Confirm the Type 1 rating meets the environmental protection requirements of the installation site. Ensure the 14-gauge steel construction aligns with mechanical load specifications. Check for UL 870 compliance documentation if required by local codes.

Selection Notes

Select this model specifically for applications requiring a 90-degree transition within the 10x10 inch wireway size range. The sweep design is preferred over sharp bends to reduce cable stress during installation. Verify compatibility with other components in the Hoffman Lay-In series trunking system before procurement.

Part Context

This component belongs to the Hoffman Lay-In series of wireway fittings. It serves as a connecting element for trunking systems, allowing for directional changes without interrupting the structural integrity of the enclosure. The F1010T variant specifically addresses the intersection of two perpendicular runs of equal width.

Replacement Considerations

Direct substitutes include other manufacturers' 10x10 inch sweep tees meeting UL 870 standards. Ensure any replacement maintains the 14-gauge thickness and compatible mounting hole patterns. Generic equivalents must support the same Type 1 indoor rating.