F22T148GVP

Overview

The F22T148GVP is a straight section wireway manufactured by Hoffman Enclosures, Inc. It features a lay-in flat-cover design constructed from 14/16 gauge steel with an ANSI 61 gray polyester powder coated finish. The unit measures 48 inches in length with internal dimensions of 2.50 inches by 2.50 inches. It is rated for NEMA Type 1 applications and holds UL 870 and CUL certifications. The component is designed for indoor use to enclose wire and cable runs.

Feature Summary

• Lay-in flat-cover design allows wires to be inserted from the side without removing the cover
• Flat cover construction enables flush mounting against walls or ceilings
• Keyhole screw slots on covers facilitate easy access and installation

Applications

• Enclosing wire and cable in indoor wireway runs
• Flush mounting on walls or ceilings
• Cable management in industrial environments requiring NEMA Type 1 protection

Procurement Notes

Verify that the required length matches the standard 48-inch specification, as custom lengths may not be available. Confirm that the 2.5x2.5 inch internal cross-section aligns with the cable bundle size. Ensure the environment is indoors, as this NEMA Type 1 rating does not provide protection against weather or dust ingress suitable for outdoor exposure. Check for compatibility with existing Hoffman wireway accessories.

Selection Notes

Select this model when a straight run of wireway is needed for indoor cable routing. The 2.5x2.5 inch size accommodates moderate cable volumes. The lay-in feature simplifies maintenance and future additions compared to bolted covers. Consider the weight of approximately 9 lbs for structural support planning. Verify that the gray finish meets aesthetic requirements for the installation site.

Part Context

This wireway is part of the Hoffman Enclosures line of cable management solutions. It complements other Hoffman wireway sections, elbows, and fittings to create complete cable routing systems. The product falls under the broader category of electrical enclosure accessories and raceways used in industrial control panels and machinery.

Replacement Considerations

No direct public substitute part numbers are confirmed for this specific model. When replacing, ensure the new component matches the 2.5x2.5 inch internal dimensions and 48-inch length. Verify that any alternative maintains NEMA Type 1 rating and UL 870 certification for compliance.