FBMH1608HM600-TV

Chip Ferrite Bead Overview

The FBMH1608HM600-TV is a single-channel ferrite chip bead from the FB series, manufactured by Taiyo Yuden. It features a 0603 (1608 metric) surface-mount package with dimensions of 1.6 mm length, 0.8 mm width, and 0.8 mm height. The component provides an impedance of 60 Ohms at a test frequency of 100 MHz with a tolerance of 25%. It supports a maximum DC current of 3 A and has a maximum DC resistance of 25 mOhms. The device operates within a temperature range of -40°C to +125°C.

Chip Ferrite Bead Feature Summary

• Provides electromagnetic interference suppression for power lines through high-impedance characteristics at specific frequencies.
• Designed for surface-mount assembly in compact electronic circuits using standard 0603 footprints.
• Capable of handling high direct current loads while maintaining low DC resistance to minimize power loss.

Chip Ferrite Bead Applications

• Power line filtering in portable electronic devices
• EMI suppression in automotive electronics systems
• Noise reduction in industrial equipment power supplies

Chip Ferrite Bead Procurement Notes

Verify the exact suffix designation during procurement, as manufacturers may update part numbers or introduce alternate designations such as LCMGA160808T600RG. Confirm RoHS compliance status and packaging options directly with the supplier or authorized distributor before ordering. Ensure the requested variant matches the specific electrical requirements and physical dimensions defined in the official datasheet to avoid integration issues.

Chip Ferrite Bead Selection Notes

Select this component when a 60 Ohm impedance at 100 MHz is required for noise suppression on power lines carrying up to 3 Amperes. The 0603 package size is suitable for space-constrained designs. Consider the low DC resistance of 25 mOhms for efficiency-critical applications. Verify that the operating temperature range of -40°C to +125°C meets the environmental conditions of the target application.

Chip Ferrite Bead Part Context

This ferrite bead belongs to the FB series of passive components from Taiyo Yuden, which are designed for EMI/RFI suppression. The series includes various impedance values and current ratings tailored for different circuit protection needs. These components are widely used in consumer, industrial, and automotive electronics to filter high-frequency noise from power and signal lines without significantly affecting the desired DC or low-frequency signals.

Chip Ferrite Bead Replacement Considerations

Taiyo Yuden lists LCMGA160808T600RG as a suggested alternate part number for this component. Users should verify electrical compatibility and physical dimensions before substitution. Other generic 0603 ferrite beads with similar 60 Ohm impedance and 3A current rating may serve as functional equivalents if sourcing constraints exist.

Chip Ferrite Bead FAQ

What is the test frequency for the specified impedance value?

The impedance of 60 Ohms is measured at a test frequency of 100 MHz.

Does this component support high-current applications?

Yes, it is rated for a maximum DC current of 3 Amperes, making it suitable for power line filtering in high-current circuits.