GP1002

Diode Arrays Overview

The GP1002 is a standard recovery rectifier from the GP1001–GP1007 series by Taiwan Semiconductor. It features a dual common cathode configuration housed in a TO-220AB package. The device supports a repetitive peak reverse voltage of 100 V and an average forward current of 10 A. Maximum surge current capability reaches 125 A for an 8.3 ms half-sine wave. Forward voltage is typically 1.1 V at 5 A, with a maximum junction temperature of 150 °C.

Diode Arrays Feature Summary

• Glass passivated chip junction construction
• High efficiency and low forward voltage drop
• High current and surge current capability
• Halogen-free according to IEC 61249-2-21

Diode Arrays Applications

• DC to DC converters
• Switching mode converters and inverters
• General purpose rectification

Diode Arrays Procurement Notes

Verify the specific ordering code suffix against official documentation to confirm packaging type and qualification status. Standard tubes contain fifty units per tube. Confirm RoHS compliance and halogen-free status requirements prior to procurement. Ensure the selected variant matches the required voltage rating and thermal management specifications for the intended application environment.

Diode Arrays Selection Notes

Select this component for applications requiring a 100 V blocking voltage and 10 A continuous current handling. The TO-220AB package facilitates through-hole mounting with a maximum torque of 0.56 N⋅m. Consider the 3 °C/W junction-to-case thermal resistance for heat dissipation planning. Verify if AEC-Q101 automotive qualification is necessary, as indicated by the 'H' suffix in the ordering information.

Diode Arrays Part Context

This part belongs to the GP1001–GP1007 series of 10A glass passivated rectifiers. The series covers voltage ratings from 50V to 1000V. The GP1002 specifically provides a 100V rating within this lineup. All variants share identical electrical characteristics except for the reverse voltage specification.

Diode Arrays Replacement Considerations

Direct substitutes must match the 10A current rating, 100V reverse voltage, TO-220AB package, and dual common cathode configuration. Verify equivalent forward voltage and surge current capabilities.