H11L1300W

Logic Output Optoisolators Overview

The H11L1300W is a single-channel logic output optoisolator manufactured by onsemi. It features an open collector output and supports data rates up to 1MHz. The device provides a high common-mode transient immunity (CMTI) of 50kV/μs and offers electrical isolation with a rated voltage of 5300Vrms. It utilizes a standard 6-DIP package for through-hole mounting, designed for reliable signal transmission across isolated boundaries in digital communication applications.

Logic Output Optoisolators Feature Summary

• High-speed operation capability supporting 1MHz data rates
• Robust common-mode transient immunity for noise rejection
• Open collector output configuration for flexible interfacing

Logic Output Optoisolators Applications

• Digital communication interface isolation
• Microprocessor system isolation
• Solid-state relay control circuits

Logic Output Optoisolators Procurement Notes

Verify the specific suffix '300' against current manufacturer catalogs to confirm availability status, as this variant may be discontinued or superseded. Ensure the required isolation voltage rating of 5300Vrms meets the safety standards of the target application. Confirm that the open collector output type aligns with the pull-up requirements of the receiving circuitry before finalizing procurement.

Logic Output Optoisolators Selection Notes

Select this component when high-speed digital isolation is required alongside robust noise immunity. The 1MHz data rate distinguishes it from slower variants suitable for basic switching. The open collector output necessitates an external pull-up resistor, which must be accounted for in the design phase. Verify that the 6-DIP package dimensions fit the intended PCB layout constraints.

Logic Output Optoisolators Part Context

This part belongs to the H11L series of logic output optocouplers from onsemi. These devices are designed for general-purpose digital isolation tasks. The H11L1300W specifically denotes the version with the 300mA peak forward current capability and 5300Vrms isolation rating, packaged in a 6-pin DIP format for industrial and consumer electronics applications.

Logic Output Optoisolators Replacement Considerations

Publicly confirmed substitute part numbers include H11L1TVM. Verify compatibility regarding pinout, isolation voltage, and speed specifications when substituting.