IW610FHN/A1ZDIK

RF Transceiver ICS Overview

The NXP IW610FHN/A1ZDIK is a multiprotocol wireless module integrating Wi-Fi 6, Bluetooth LE 5.4, and 802.15.4 radios. It operates on dual-band 2.4 GHz and 5 GHz frequencies with a single-input single-output (1x1) architecture. The device supports peak throughput of 114.7 Mbps using 256 QAM at 20 MHz bandwidth. Key electrical parameters include a maximum transmit power of +23 dBm and receiver sensitivity ranging from -67.4 dBm to -105.7 dBm depending on the protocol. It functions within a supply voltage range of 3.14 V to 3.46 V and withstands operating temperatures from -40°C to +125°C.

RF Transceiver ICS Feature Summary

• Integrates Wi-Fi 6, Bluetooth LE 5.4, and 802.15.4 radios for tri-radio operation
• Supports Matter connectivity via both Wi-Fi and Thread protocols
• Includes EdgeLock security features for secure boot and firmware updates
• Enables efficient radio coexistence through dual-antenna configuration support

RF Transceiver ICS Applications

• Smart home devices requiring Matter compatibility
• Industrial IoT sensor nodes
• Consumer electronics with multi-protocol connectivity needs
• Building automation systems

RF Transceiver ICS Procurement Notes

Verify the specific suffix A1ZDIK against official NXP documentation to confirm pinout and antenna configuration. Ensure compliance with regional regulatory standards for 2.4 GHz and 5 GHz operations. Confirm that the host system supports required interfaces such as SDIO, SPI, UART, or USB. Check moisture sensitivity levels and reflow soldering profiles prior to assembly.

RF Transceiver ICS Selection Notes

Select this component when a compact solution supporting simultaneous Wi-Fi 6 and low-energy protocols is required. It is suitable for applications needing extended range features like Target Wake Time and Dual Carrier Modulation. Consider its wide industrial temperature range for harsh environments. Evaluate interface availability on the host processor to match SDIO, SPI, or USB requirements.

RF Transceiver ICS Part Context

The IW610 family represents NXP's optimized wireless solutions for IoT, combining high-efficiency Wi-Fi 6 with versatile low-power radios. This series aims to reduce latency and increase network coverage compared to previous standards. The FHN variant specifically denotes a module form factor designed for rapid deployment by module partners, integrating the silicon into a ready-to-use package.

RF Transceiver ICS Replacement Considerations

The IW610GHN/A1ZDIMP is a documented alternative within the same product family. Verify if the GHN variant offers identical interface and performance specifications for direct substitution.