K125150

Overview

The Appleton K125150 is a blank conduit body cover designed for use with Form 35 UNILETS Conduit Outlet Bodies. It accommodates trade sizes of 1-1/4 inches and 1-1/2 inches. The component is constructed from steel with a zinc electroplated finish to provide corrosion resistance. It utilizes a screw-type attachment method for secure installation. The unit weighs approximately 0.37 pounds each. It holds UL 514A/B and CSA C22.2 approvals, ensuring compliance with relevant safety standards for electrical installations.

Feature Summary

• Blank design suitable for enclosing conduit body openings
• Zinc electroplated steel construction for durability
• Compatible with Form 35 UNILETS conduit outlet bodies
• Screw-based mounting mechanism

Applications

• Covering openings in Form 35 UNILETS conduit outlet bodies
• Electrical raceway systems requiring blank covers
• Industrial and commercial wiring enclosures

Procurement Notes

Verify that the target conduit body matches the Form 35 specification before procurement. Confirm that the trade size requirement aligns with either 1-1/4 inch or 1-1/2 inch hubs. Ensure the application environment is compatible with zinc electroplated steel finishes. Cross-reference approval markings such as UL 514A/B and CSA C22.2 against local code requirements. Check for any specific ordering suffixes if required by the distributor.

Selection Notes

Select this part only when a blank cover is needed for a Form 35 UNILETS conduit body. Ensure the hub size corresponds to the installed conduit dimensions of 1-1/4 or 1-1/2 inches. Consider the zinc electroplated material for standard indoor or protected outdoor environments. Verify compatibility with existing conduit body hardware. Do not substitute with non-Form 35 covers as they will not fit correctly.

Part Context

This component belongs to the Appleton UNILETS line of conduit bodies. It serves as a replacement or new installation part for sealing off unused openings in junction boxes. The Form 35 designation indicates a specific internal configuration and external shape. It is manufactured by Emerson under the Appleton brand.

Replacement Considerations

Direct substitutes must match the Form 35 type and 1-1/4 to 1-1/2 inch trade size. Generic blank covers may not fit the specific UNILETS hub geometry. Verify thread pitch and screw hole alignment before substitution.

FAQ

What type of conduit body does this cover fit?

It fits Form 35 UNILETS Conduit Outlet Bodies.

What is the material composition of the cover?

The cover is made of steel with a zinc electroplated finish.

Does this cover have certifications?

Yes, it has UL 514A/B and CSA C22.2 approvals.