L6362A

Drivers, Receivers, Transceivers Overview

The L6362A is an IO-Link and SIO mode transceiver device compliant with PHY2 (3-wire connection). It supports COM1 (4.8 kbaud), COM2 (38.4 kbaud), and COM3 (230.4 kbaud) modes. The supply voltage ranges from 7 V to 36 V, with a maximum operating voltage of 36 V and minimum of 7 V. The device operates within a temperature range of -40 °C to +125 °C. It features selectable output stages including high-side, low-side, or push-pull configurations, capable of driving resistive, capacitive, and inductive loads up to 30 μF or 500 mJ. The package is a miniaturized VFDFPN 12L measuring 3x3x0.90 mm.

Drivers, Receivers, Transceivers Feature Summary

• Supports IO-Link PHY2 standard with COM1, COM2, and COM3 baud rates
• Configurable output stages for high-side, low-side, or push-pull load driving
• Comprehensive protection against reverse polarity, short circuits, overvoltage, and open wires
• Integrated EMC and surge protection meeting IEC 61000-4-4 and EN60947-5-2 standards

Drivers, Receivers, Transceivers Applications

• Industrial sensor modules requiring IO-Link communication
• Connections to PLCs, IO-Link masters, relays, or valves
• Evaluation boards for IO-Link physical layer development
• Smart sensors operating in 24 V industrial environments

Drivers, Receivers, Transceivers Procurement Notes

Verify the specific ordering suffix to ensure correct packaging and tape/reel specifications. Confirm RoHS compliance status through official datasheets before integration. Check moisture sensitivity levels for proper storage and handling procedures during assembly. Ensure the selected variant matches the required output configuration and voltage range for the target application design.

Drivers, Receivers, Transceivers Selection Notes

Select this component when a PHY2 compliant transceiver is required for 3-wire IO-Link connections. Choose based on the need for configurable output stages to drive various load types including inductive coils. Consider the wide operating temperature range and integrated protections for harsh industrial environments. Verify compatibility with 5 V or 3.3 V logic interfaces for microcontroller connection.

Drivers, Receivers, Transceivers Part Context

The L6362A belongs to the L6362A series of IO-Link transceivers manufactured by STMicroelectronics. It serves as a key component for implementing IO-Link Device Physical Layer functions. The device is often paired with STM32 microcontrollers and evaluation kits like STEVAL-IOD003V1 for development purposes. It complements master side transceivers such as the L6360 in complete networking solutions.

Drivers, Receivers, Transceivers Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. Evaluate alternative PHY2 compliant transceivers from other manufacturers if direct replacement is necessary, ensuring pinout and electrical parameter compatibility.