LM358ADRE4

$0.11

Description：IC OPAMP GP 2 CIRCUIT 8SOIC
Series：-
Mfr：Texas Instruments
Package：Tape & Reel (TR)

SKU:c605fe8a0266 Category: Instrumentation, Op Amps, Buffer Amps Brand: Texas Instruments

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

LM358ADRE4 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Texas Instruments. Its product description is IC OPAMP GP 2 CIRCUIT 8SOIC. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for LM358ADRE4

Description：IC OPAMP GP 2 CIRCUIT 8SOIC
Series：-
Mfr：Texas Instruments
Package：Tape & Reel (TR)
Amplifier Type：General Purpose
Number of Circuits：2
Output Type：-
Slew Rate：0.3V/µs
Gain Bandwidth Product：700 kHz
Current - Input Bias：15 nA
Voltage - Input Offset：2 mV
Current - Supply：500µA (x2 Channels)
Current - Output / Channel：40 mA
Voltage - Supply Span (Min)：3 V
Voltage - Supply Span (Max)：30 V
Operating Temperature：0°C ~ 70°C (TA)
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SOIC
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for LM358ADRE4

LM358ADRE4

Instrumentation, Op Amps, Buffer Amps Overview

The LM358ADRE4 is a dual operational amplifier manufactured by Texas Instruments, featuring two independent high-gain frequency-compensated circuits. It operates within a supply voltage range of 3 V to 32 V for single supplies or ±1.5 V to ±16 V for dual supplies. Key electrical parameters include a gain-bandwidth product of 700 kHz, a slew rate of 300 mV/µs, and an input offset voltage of 2 mV. The device draws a typical operating supply current of 350 µA per channel and supports output currents up to 40 mA. It is housed in an 8-pin SOIC package with a junction temperature range of 0°C to +70°C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Dual-channel architecture with internal frequency compensation for stability
Wide single-supply operation capability from 3 V to 32 V
Input common-mode voltage range includes ground potential
Low power consumption independent of supply voltage

Instrumentation, Op Amps, Buffer Amps Applications

Transducer amplifiers
DC amplifier modules
Sensor signal conditioning

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the suffix 'E4' indicates lead-free construction compliant with RoHS standards. Confirm the SOIC-8 package dimensions match the target PCB footprint. Ensure the operating temperature range meets system requirements. Check datasheet revisions for any parameter updates. Validate authenticity through authorized distribution channels.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component for general-purpose analog signal processing requiring low cost and wide voltage tolerance. The rail-to-rail input capability allows direct interfacing with ground-referenced sensors. Consider the 700 kHz bandwidth for applications not requiring high-speed response. Verify thermal dissipation capabilities within the SOIC-8 package for the specific load conditions.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the LM358 family of dual operational amplifiers from Texas Instruments. The series is widely used in industrial and consumer electronics for basic amplification tasks. The 'ADR' suffix denotes tape-and-reel packaging, while 'E4' specifies environmental compliance. It serves as a standard solution for budget-conscious designs needing reliable performance.