LT1006S8#TR

Description：IC OPAMP GP 1 CIRCUIT 8SO
Series：-
Mfr：Analog Devices Inc.
Package：Tape & Reel (TR)

SKU:698231d31c4e Category: Instrumentation, Op Amps, Buffer Amps Brand: Analog Devices Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

LT1006S8#TR is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Analog Devices Inc.. Its product description is IC OPAMP GP 1 CIRCUIT 8SO. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for LT1006S8#TR

Description：IC OPAMP GP 1 CIRCUIT 8SO
Series：-
Mfr：Analog Devices Inc.
Package：Tape & Reel (TR)
Amplifier Type：General Purpose
Number of Circuits：1
Output Type：-
Slew Rate：1.2V/µs
Gain Bandwidth Product：-
Current - Input Bias：10 nA
Voltage - Input Offset：80 µV
Current - Supply：360µA
Current - Output / Channel：-
Voltage - Supply Span (Min)：5 V
Voltage - Supply Span (Max)：30 V
Operating Temperature：0°C ~ 70°C
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SO

Instrumentation, Op Amps, Buffer Amps datasheet and documents for LT1006S8#TR

LT1006S8#TR

Instrumentation, Op Amps, Buffer Amps Overview

The LT1006S8#TR is a single-precision operational amplifier in an 8-lead plastic SOIC package. It features a maximum input offset voltage of 150µV and drift up to 4.5µV/°C. The device operates on a minimum supply voltage of 2.7V with typical current consumption of 350µA. Key electrical parameters include a gain bandwidth product of 600kHz, a slew rate of 0.25V/µs, and an input noise voltage density of 23nV/√Hz at 10Hz. It provides high common mode rejection (92dB min) and power supply rejection (97dB min).

Instrumentation, Op Amps, Buffer Amps Feature Summary

Single-supply operation with input common-mode range extending to ground.
Output stage capable of sinking current while swinging within millivolts of ground.
Phase reversal protection prevents output inversion during negative input transients.
Supply current and slew rate are programmable via an external resistor on Pin 8.

Instrumentation, Op Amps, Buffer Amps Applications

Low power sample-and-hold circuits
Battery-powered precision instrumentation
Strain gauge signal conditioners
Thermocouple amplifiers

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix #TR indicates tape and reel packaging when sourcing. Confirm the S8 package designation matches the required surface mount footprint. Ensure the component grade aligns with the specified temperature range for the target application environment.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this part for applications requiring ground-referenced inputs and outputs without dual supplies. Consider the programmable Pin 8 for adjusting the trade-off between speed and power consumption. Verify that the 150µV offset voltage meets the system accuracy requirements.

Instrumentation, Op Amps, Buffer Amps Part Context

This component belongs to the LT1006 family of micropower precision op amps. It is designed specifically for single-supply environments where low power and high precision are critical. The S8 variant utilizes a standard narrow plastic small outline package suitable for automated assembly.