LTC6240HVHS8#TRPBF

Instrumentation, Op Amps, Buffer Amps Overview

The Analog Devices LTC6240HVHS8#TRPBF is a single-channel, low noise, rail-to-rail output CMOS operational amplifier. It features an 18MHz gain bandwidth product and a 10V/µs slew rate. The device guarantees operation with supply voltages up to ±5.5V (12V total). Key electrical characteristics include a maximum input offset voltage of 450µV, typical input bias current of 1pA, and input noise density below 10nV/√Hz at 1kHz. It operates within a temperature range of –40°C to 125°C and is housed in an 8-lead plastic SO package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• High-voltage capability supporting dual supplies up to ±5.5V
• Ultra-low input bias current for high impedance applications
• Rail-to-rail output stage maximizing dynamic range
• Low offset voltage and drift ensuring precision signal processing

Instrumentation, Op Amps, Buffer Amps Applications

• Photo diode amplifiers
• Charge coupled device amplifiers
• Medical instrumentation
• High impedance transducer amplifiers

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific HV grade and H-temperature extension by confirming the full part number suffix against official Analog Devices documentation. Ensure the ordering code matches the required 8-lead SO package and tape-and-reel configuration. Cross-reference the manufacturer's latest datasheet to confirm current production status and lead-free compliance before finalizing procurement.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when designs require extended supply voltage ranges beyond standard 5V limits while maintaining low noise performance. The H-grade variant is suitable for environments requiring operation up to 125°C. Consider the single-channel configuration for space-constrained PCB layouts where only one amplifier is needed per footprint.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the LTC6240/LTC6241/LTC6242 family of unity-gain stable CMOS op amps. The 'HV' designation indicates enhanced high-voltage support compared to standard versions. The 'H' suffix denotes the industrial temperature range extension to 125°C. The 'S8' identifier specifies the 8-lead small outline package format.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

LTC6240CS8#TRPBF

Instrumentation, Op Amps, Buffer Amps FAQ

What is the maximum total supply voltage for the LTC6240HV series?

The LTC6240HV series supports a total supply voltage of up to 12V, allowing operation on supplies up to ±5.5V.

Does the output swing reach the negative supply rail?

Yes, the output swings within 30mV of either supply rail, and the input common mode range extends to the negative supply.