LTV-817S-TA

$0.32

Description：OPTOISOLATOR 5KV 1CH TRANS 4-SMD
Series：LTV-8x7
Mfr：Lite-On Inc.
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:80864a741040 Category: Transistor, Photovoltaic Output Optoisolators Brand: Lite-On Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

LTV-817S-TA is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Lite-On Inc.. Its product description is OPTOISOLATOR 5KV 1CH TRANS 4-SMD. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for LTV-817S-TA

Description：OPTOISOLATOR 5KV 1CH TRANS 4-SMD
Series：LTV-8x7
Mfr：Lite-On Inc.
Package：Tape & Reel (TR),Cut Tape (CT)
Number of Channels：1
Voltage - Isolation：5000Vrms
Current Transfer Ratio (Min)：50% @ 5mA
Current Transfer Ratio (Max)：600% @ 5mA
Turn On / Turn Off Time (Typ)：-
Rise / Fall Time (Typ)：4µs, 3µs
Input Type：DC
Output Type：Transistor
Voltage - Output (Max)：35V
Current - Output / Channel：50mA
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：50 mA
Vce Saturation (Max)：200mV
Operating Temperature：-55°C ~ 110°C
Mounting Type：Surface Mount
Package / Case：4-SMD, Gull Wing
Supplier Device Package：4-SMD
Grade：-
Qualification：-

Transistor, Photovoltaic Output Optoisolators datasheet and documents for LTV-817S-TA

LTV-817S-TA

Transistor, Photovoltaic Output Optoisolators Overview

The LTV-817S-TA is a surface-mount transistor output optocoupler from Lite-On Inc. It features a single channel with a 4-SMD (gull-wing) package. The device provides high isolation voltage of 5000Vrms and supports DC input. Key electrical parameters include a maximum forward current of 50mA, typical forward voltage of 1.2V, and collector-emitter saturation voltage of 200mV. The current transfer ratio ranges from 50% to 600% at IF=5mA. Response times are typically 4μs rise and 3μs fall. Operating temperature spans -55°C to 110°C.

Transistor, Photovoltaic Output Optoisolators Feature Summary

High input-output isolation voltage for safety compliance
Surface mount gull-wing package for automated assembly
Wide operating temperature range for industrial environments

Transistor, Photovoltaic Output Optoisolators Applications

Computer terminals
System appliances and measuring instruments
Registers, copiers, and automatic vending machines

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix 'TA' corresponds to the tape and reel packaging format required for your SMT line. Confirm that the 4-SMD gull-wing footprint matches your PCB design. Ensure RoHS3 compliance meets your regional regulatory standards. Cross-reference the manufacturer part number with distributor codes to avoid ordering errors due to similar family members.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when a surface-mount solution is required for signal isolation in compact designs. It serves as a direct replacement for through-hole variants like the LTV-817D where board space is limited. Consider the 5000Vrms isolation rating for primary-side sensing applications. Verify that the 50mA output current capability meets the load requirements of the receiving circuitry.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the LTV-8x7 series of photocouplers, which are widely used for general-purpose isolation. The 'S' designation indicates the surface-mount package variant, distinguishing it from the PDIP versions. The LTV-817 family is a standard industry reference for transistor output optocouplers, offering a balance of performance and cost-effectiveness for digital signal transmission.