MAX338EPE+

$16.85

Description：IC MUX 8:1 400OHM 16DIP
Series：-

SKU:aef7747622e8 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX338EPE+ is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC MUX 8:1 400OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX338EPE+

Description：IC MUX 8:1 400OHM 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：-
Multiplexer/Demultiplexer Circuit：8:01
On-State Resistance (Max)：400Ohm
Channel-to-Channel Matching (ΔRon)：4Ohm
Voltage - Supply, Single (V+)：4.5V ~ 30V
Voltage - Supply, Dual (V±)：±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)：500ns, 500ns
-3db Bandwidth：-
Charge Injection：1.5pC
Channel Capacitance (CS(off), CD(off))：3pF, 11pF
Current - Leakage (IS(off)) (Max)：20pA
Crosstalk：-92dB @ 100kHz
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：1

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX338EPE+

MAX338EPE+

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX338EPE+ is an 8-channel CMOS analog multiplexer in a 16-pin PDIP package. It connects one of eight inputs to a common output via a 3-bit binary address. The device operates from single supplies of +4.5V to +30V or dual supplies of ±4.5V to ±20V. Key electrical parameters include a maximum on-resistance of 650Ω (single supply) or 500Ω (dual supply), off-leakage current less than 20pA at +25°C, and typical charge injection of 1.5pC. Control inputs are TTL compatible (+0.8V to +2.4V). The component supports bidirectional signal flow and features ESD protection exceeding 2000V.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Extremely low off-leakage currents below 20pA at +25°C
Guaranteed low charge injection with a typical value of 1.5pC
TTL-compatible control inputs across the full specified temperature range
ESD protection greater than 2000V per method 3015.7

Analog Switches, Multiplexers, Demultiplexers Applications

Data-acquisition systems
Test equipment
Military radios
Guidance and control systems
Sample-and-hold circuits

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the ordering suffix 'P' corresponds to the 16-pin Plastic Dual In-Line Package (PDIP) configuration. Confirm the 'E' suffix indicates the extended temperature range of -40°C to +85°C. Ensure the '+' suffix denotes lead-free and RoHS compliance status as defined by the manufacturer's specifications for this specific part number.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select the MAX338EPE+ when an 8-channel single-ended multiplexer is required with low leakage characteristics. This component serves as a pin-compatible upgrade for industry-standard DG508A devices. Consider alternative models like the MAX328 if lower leakage is prioritized over higher on-resistance values.

Analog Switches, Multiplexers, Demultiplexers Part Context

This component belongs to the MAX338/MAX339 family of monolithic CMOS analog multiplexers. The MAX338 variant specifically provides 8 channels, whereas the MAX339 offers dual 4-channel configurations. Both share similar architectural features and fabrication processes within the Maxim Integrated portfolio.