MAX4535EUD

Description：IC SW DPST-NOX2 400OHM 14TSSOP
Series：-

SKU:64c62fb5c529 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4535EUD is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SW DPST-NOX2 400OHM 14TSSOP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX4535EUD

Description：IC SW DPST-NOX2 400OHM 14TSSOP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：DPST - NO
Multiplexer/Demultiplexer Circuit：2:01
On-State Resistance (Max)：400Ohm
Channel-to-Channel Matching (ΔRon)：2Ohm
Voltage - Supply, Single (V+)：9V ~ 36V
Voltage - Supply, Dual (V±)：±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)：275ns, 200ns
-3db Bandwidth：-
Charge Injection：1pC
Channel Capacitance (CS(off), CD(off))：5pF, 4pF
Current - Leakage (IS(off)) (Max)：500pA
Crosstalk：-53dB @ 1MHz
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Surface Mount
Package / Case：14-TSSOP (0.173", 4.40mm Width)
Supplier Device Package：14-TSSOP
Number of Circuits：2

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX4535EUD

MAX4535EUD

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4535EUD is a dual 2-to-1 fault-protected multiplexer in a 14-pin TSSOP package. It operates with ±4.5V to ±20V dual supplies or +9V to +36V single supply. Key electrical parameters include a maximum on-resistance of 400Ω and channel matching of 10Ω max. The device supports rail-to-rail signal handling with overvoltage clamping at 150mV beyond the rails. Fault protection provides ±40V tolerance with power off and ±25V with power on. Logic inputs are TTL/CMOS compatible, requiring 0.8V for low and 2.4V for high thresholds.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Fault-protected analog inputs handle signals exceeding supply rails without damage
Rail-to-rail signal capability allows full voltage range operation within supply limits
TTL and CMOS logic input compatibility ensures broad interface integration
No power-supply sequencing required for safe operation during startup

Analog Switches, Multiplexers, Demultiplexers Applications

Data-acquisition systems
Industrial and process control
Avionics signal routing
Redundant and backup systems

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix EUD corresponds to the 14-TSSOP package and -40°C to +85°C temperature range. Confirm RoHS compliance status as indicated in official documentation. Ensure the ordering code matches the exact pin configuration and functional specifications required for the design.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when dual independent 2-to-1 switching with high-voltage fault protection is required. The TSSOP package suits surface-mount applications. Verify that the ±40V fault tolerance meets system safety requirements. Check that the 400Ω on-resistance fits the signal integrity constraints of the application.

Analog Switches, Multiplexers, Demultiplexers Part Context

The MAX4535EUD belongs to the MAX4534/MAX4535 family of fault-protected multiplexers. It shares core architecture with the single 4-to-1 MAX4534 but offers two independent channels. Both parts utilize parallel FET construction for low on-resistance and robust fault handling capabilities across high-voltage industrial environments.