MAX4552CEE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4552CEE is a quad, low-voltage, single-pole/single-throw (SPST) analog switch manufactured by Analog Devices Inc./Maxim Integrated. It features four separately controlled switches with normally open (NO) configurations. The device operates on dual supplies ranging from ±2V to ±6V or a single supply between +2V and +12V. Key electrical parameters include an on-resistance of up to 120Ω, on-resistance flatness of 8Ω max, and channel-to-channel matching of 4Ω max. Off-leakage current is specified at 1nA at +25°C and 10nA at +85°C. The component provides ±15kV ESD protection per IEC 1000-4-2 and supports rail-to-rail analog signal handling.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

• Provides ±15kV electrostatic discharge protection on NC/NO pins without latchup
• Supports rail-to-rail analog signal handling across the full supply range
• Features TTL/CMOS-compatible digital inputs for direct logic interfacing
• Maintains pin compatibility with industry-standard DG211/DG212/DG213 devices

Analog Switches, Multiplexers, Demultiplexers Applications

• Battery-operated equipment
• Data acquisition systems
• Test equipment
• Avionics
• Audio signal routing

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific ordering suffix 'CEE' to confirm the 16-pin QSOP package and commercial temperature range (0°C to +70°C). Confirm RoHS compliance status as older Maxim products may not meet current environmental directives. Check for obsolescence notices or product change notifications from the manufacturer before finalizing procurement plans.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select the MAX4552CEE when four normally open SPST switches are required. Ensure the application voltage does not exceed the absolute maximum ratings of +13V differential between V+ and V-. Verify that the system can tolerate the specified on-resistance variation over temperature and signal range. Consider the charge injection characteristics if driving high-impedance loads.

Analog Switches, Multiplexers, Demultiplexers Part Context

This component belongs to the MAX4551/MAX4552/MAX4553 family of low-voltage analog switches. The MAX4552 variant specifically provides four normally open switches, distinguishing it from the MAX4551 (four NC) and MAX4553 (two NC, two NO). All variants share identical pinouts and electrical characteristics except for the switch state configuration.

Analog Switches, Multiplexers, Demultiplexers Replacement Considerations

Pin-compatible replacements include the DG211, DG212, and DG213 series. Verify that substitute components meet the same ESD protection levels and on-resistance specifications for direct interchangeability in existing designs.