MBR2X160A180

Diode Arrays Overview

The MBR2X160A180 is a Schottky rectifier module manufactured by GeneSiC Semiconductor. It features an average forward current rating of 320 A per package and a maximum recurrent peak reverse voltage of 180 V. The device utilizes an electrically isolated SOT-227 base plate package with screw mounting. Key electrical parameters include a maximum instantaneous reverse current of 3 mA at rated DC blocking voltage and a junction-to-case thermal resistance of 0.30 °C/W per leg. Operating temperatures range from -40 °C to +150 °C, with an isolation voltage of 2500 V.

Diode Arrays Feature Summary

• High surge capability for robust transient handling
• Electrically isolated base plate for safety
• Not ESD sensitive during operation

Diode Arrays Applications

• Industrial power supplies
• DC-DC converters
• Inverter circuits

Diode Arrays Procurement Notes

Verify the manufacturer designation carefully, as distributor listings may attribute this component to Navitas Semiconductor due to corporate acquisition history. Confirm the specific datasheet version matches the required electrical tolerances. Ensure the ordering suffix corresponds to the standard SOT-227 configuration without additional custom markings unless explicitly documented in the official product specification.

Diode Arrays Selection Notes

Select this module when high current density and low forward voltage drop are critical for system efficiency. The 180 V rating suits low-voltage high-current applications. Verify that the thermal management design can maintain the junction temperature within the specified -40 °C to +150 °C range under maximum load conditions. The SOT-227 package requires appropriate screw-mounting hardware for secure installation.

Diode Arrays Part Context

This component belongs to the MBR2X series of dual Schottky diode modules designed for high-power applications. The series typically offers configurations with varying voltage and current ratings while maintaining a standardized SOT-227 footprint. This specific model provides a balance of 180 V blocking capability and 320 A continuous current handling.

Diode Arrays Replacement Considerations

Cross-reference with other MBR2X series variants such as MBR2X120A100 or MBR2X100A100 if lower current or voltage ratings are acceptable. Ensure any substitute maintains the same SOT-227 pinout and thermal resistance characteristics to fit existing board layouts.

Diode Arrays FAQ

What is the maximum thermal resistance from junction to case?

The maximum thermal resistance (Rθjc) is 0.30 °C/W per leg.

Is the module sensitive to electrostatic discharge?

No, the datasheet specifies that the device is not ESD sensitive.

What is the peak forward surge current rating?

The peak forward surge current (IFSM) is 2000 A per leg for an 8.3 ms half-sine pulse.