MCP602-I/P

Instrumentation, Op Amps, Buffer Amps Overview

The MCP602-I/P is a dual operational amplifier from Microchip Technology, utilizing advanced CMOS technology. It operates on a single supply voltage ranging from 2.7V to 6.0V and features rail-to-rail output swing with an input range that includes ground. Key electrical parameters include a typical gain bandwidth product of 2.8 MHz, a slew rate of 2.3 V/µs, and a low quiescent current of 230 µA per amplifier. The device offers a maximum input offset voltage of 2 mV at +25°C and 3 mV across the industrial temperature range (-40°C to +85°C). It is housed in an 8-lead PDIP package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Rail-to-rail output capability with input common-mode range extending below ground for single-supply operation
• Low power consumption with typical quiescent current of 230 µA per amplifier
• High open-loop gain and unity-gain stability suitable for general-purpose applications
• Industrial temperature range specification from -40°C to +85°C

Instrumentation, Op Amps, Buffer Amps Applications

• Portable equipment and battery-operated circuits
• A/D converter driver amplifiers
• Photo diode pre-amplifiers
• Analog filters and data acquisition systems

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix 'I/P' corresponds to the Industrial temperature grade and PDIP-8 through-hole package configuration. Confirm the datasheet revision matches the required specifications, as performance characteristics may vary between revisions. Ensure compatibility with single-supply voltage ranges of 2.7V to 6.0V during system design validation.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component for applications requiring low power consumption and single-supply operation. The rail-to-rail output and ground-referenced inputs make it suitable for low-voltage signal conditioning. Consider the 2.8 MHz bandwidth and 2.3 V/µs slew rate for moderate-speed signal processing tasks. Verify PCB layout requirements for guard rings if minimizing surface leakage currents is critical for high-impedance sensor interfaces.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the MCP601/1R/2/3/4 family of low-power CMOS operational amplifiers. The 'MCP602' designation indicates a dual amplifier configuration, while '-I' specifies the Industrial temperature range and '/P' denotes the PDIP-8 package. This family shares core architectural features including CMOS input stages and unified gain stability across single, dual, and quad variants.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

Direct substitutes within the same package and pinout include other members of the MCP60x family such as MCP602-I/SN (SOIC) or MCP602-I/ST (TSSOP), provided surface-mount packaging is acceptable. Cross-family replacements require verification of pin compatibility, supply voltage ranges, and electrical parameter alignment.