MOC3010SR2VM

$0.26

Description：OPTOISOLTR 4.17KV TRIAC 1CH 6SMD
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)

SKU:0b81eb1101cc Category: Triac, SCR Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MOC3010SR2VM is listed in the Triac, SCR Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISOLTR 4.17KV TRIAC 1CH 6SMD. Review the specifications below when checking this part for your BOM.

Triac, SCR Output Optoisolators specifications for MOC3010SR2VM

Description：OPTOISOLTR 4.17KV TRIAC 1CH 6SMD
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)
Output Type：Triac
Zero Crossing Circuit：No
Number of Channels：1
Voltage - Isolation：4170Vrms
Voltage - Off State：250 V
Static dV/dt (Min)：-
Current - LED Trigger (Ift) (Max)：15mA
Current - On State (It (RMS)) (Max)：-
Current - Hold (Ih)：100µA (Typ)
Turn On Time：-
Voltage - Forward (Vf) (Typ)：1.15V
Current - DC Forward (If) (Max)：60 mA
Operating Temperature：-40°C ~ 85°C
Mounting Type：Surface Mount
Package / Case：6-SMD, Gull Wing
Supplier Device Package：6-SMD
Approval Agency：IEC/EN/DIN, UL

Triac, SCR Output Optoisolators datasheet and documents for MOC3010SR2VM

MOC3010SR2VM

Triac, SCR Output Optoisolators Overview

The MOC3010SR2VM is a single-channel optocoupler featuring a PhotoTriac output, designed for surface-mount technology in a 6-SMD package. It provides an isolation voltage of 4170Vrms and supports a maximum forward current of 60mA with a typical forward voltage of 1.15V. The device operates within a temperature range of -40°C to 85°C and includes no zero-crossing circuitry. Key electrical parameters include a peak repetitive off-state voltage of 250V and a maximum LED trigger current of 5mA.

Triac, SCR Output Optoisolators Feature Summary

Integrates an infrared emitting diode with a light-sensitive triac for signal transmission across isolated circuits.
Provides high-voltage isolation capability suitable for interfacing low-voltage control logic with AC power systems.
Features a non-zero-crossing design allowing for phase-angle control applications without timing constraints.

Triac, SCR Output Optoisolators Applications

Solid-state relay driver circuits
AC power switching control interfaces
Industrial motor control systems

Triac, SCR Output Optoisolators Procurement Notes

Verify component authenticity through authorized onsemi distribution channels or certified partners. Confirm the specific suffix 'SR2VM' matches the required tape-and-reel packaging configuration. Ensure compliance with RoHS directives and UL 1577 certification requirements for the target application environment. Validate that the obsolete status does not impact long-term supply chain stability for production runs.

Triac, SCR Output Optoisolators Selection Notes

Select this component when a non-zero-crossing triac output is required for phase-control applications. Consider the 250V blocking voltage limit for load compatibility. Evaluate the 60mA input current capability against the driving microcontroller or logic gate output strength. Compare thermal dissipation characteristics against the expected ambient operating conditions within the specified temperature range.

Triac, SCR Output Optoisolators Part Context

This device belongs to the MOC301x series of optocouplers from onsemi, which are engineered for general-purpose AC switching. The series utilizes a gallium arsenide infrared LED coupled to a silicon triac. This specific model represents a surface-mount variant optimized for automated assembly processes in consumer and industrial electronics manufacturing.