MP62341DH-LF-Z

$1.99

Description：IC PWR SWITCH 1:2 8MSOP
Series：-
Mfr：Monolithic Power Systems Inc.
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:374f41654b82 Category: Power Distribution Switches, Load Drivers Brand: Monolithic Power Systems Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MP62341DH-LF-Z is listed in the Power Distribution Switches, Load Drivers range at ChipApex. The manufacturer field lists Monolithic Power Systems Inc.. Its product description is IC PWR SWITCH 1:2 8MSOP. Review the specifications below when checking this part for your BOM.

Power Distribution Switches, Load Drivers specifications for MP62341DH-LF-Z

Description：IC PWR SWITCH 1:2 8MSOP
Series：-
Mfr：Monolithic Power Systems Inc.
Package：Tape & Reel (TR),Cut Tape (CT)
Switch Type：General Purpose
Number of Outputs：2
Ratio - Input:Output：1:02
Output Configuration：High Side
Output Type：-
Interface：On/Off
Voltage - Load：2.7V ~ 5.5V
Voltage - Supply (Vcc/Vdd)：Not Required
Current - Output (Max)：1A
Rds On (Typ)：85mOhm
Input Type：-
Features：Load Discharge, Status Flag
Fault Protection：Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Surface Mount
Supplier Device Package：8-MSOP-EP
Package / Case：8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Grade：-
Qualification：-

Power Distribution Switches, Load Drivers datasheet and documents for MP62341DH-LF-Z

MP62341DH-LF-Z

Power Distribution Switches, Load Drivers Overview

The MP62341DH-LF-Z is a dual-channel power distribution switch IC from Monolithic Power Systems. It supports input voltages from 2.7 V to 5.5 V and delivers up to 1 A continuous output current per channel. The device features a maximum on-resistance of 130 mOhms and includes a fixed current limit of 1.5 A. Key timing parameters include a maximum turn-on time of 3 ms and a maximum idle time of 10 ms. It operates within a temperature range of -40°C to +85°C and is housed in an MSOP-8E package.

Power Distribution Switches, Load Drivers Feature Summary

Dual-channel power distribution with independent control
Integrated active high enable logic for load management
Built-in protection against overcurrent, overtemperature, and reverse current conditions

Power Distribution Switches, Load Drivers Applications

Power distribution in industrial equipment
Load switching in consumer electronics
Peripheral power management in embedded systems

Power Distribution Switches, Load Drivers Procurement Notes

Verify the specific suffix LF-Z indicates lead-free compliance and RoHS status through official manufacturer documentation or authorized distributor datasheets. Confirm the MSOP-8E package dimensions and thermal characteristics match your PCB layout requirements before finalizing procurement orders.

Power Distribution Switches, Load Drivers Selection Notes

Select this component when a dual-channel solution is required for 3.3V or 5V systems. Ensure the 1A continuous current rating and 1.5A current limit are sufficient for the intended loads. Consider the 130 mOhm on-resistance for power dissipation calculations and verify that the 3 ms turn-on time aligns with system startup sequencing requirements.

Power Distribution Switches, Load Drivers Part Context

This part belongs to the MP62341 series of power switches. It is designed as a compact solution for managing multiple power rails in space-constrained applications. The MSOP-8E package provides a balance between pin count and thermal performance suitable for surface-mount assembly.