MP62350EK-LF-Z

$0.61

Description：IC PWR SWITCH 1:2 8MSOP
Series：-
Mfr：Monolithic Power Systems Inc.
Package：Tape & Reel (TR)

SKU:2b92b5256b54 Category: Power Distribution Switches, Load Drivers Brand: Monolithic Power Systems Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

Product Detailed Parameters

Description：IC PWR SWITCH 1:2 8MSOP
Series：-
Mfr：Monolithic Power Systems Inc.
Package：Tape & Reel (TR)
Switch Type：General Purpose
Number of Outputs：2
Ratio - Input:Output：1:02
Output Configuration：High Side
Output Type：-
Interface：On/Off
Voltage - Load：2.7V ~ 5.5V
Voltage - Supply (Vcc/Vdd)：Not Required
Current - Output (Max)：500mA
Rds On (Typ)：85mOhm
Input Type：Non-Inverting
Features：Load Discharge, Status Flag
Fault Protection：Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Operating Temperature：-20°C ~ 85°C (TA)
Mounting Type：Surface Mount
Supplier Device Package：8-MSOP
Package / Case：8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Grade：-
Qualification：-

Download product information

MP62350EK-LF-Z

Overview

The MP62350EK-LF-Z is a dual-channel power distribution switch from Monolithic Power Systems, designed for 3.3V and 5V systems. It features an active-low control input and provides 500mA output current per channel with a 750mA current limit. The device operates within a supply voltage range of 2.7V to 5.5V and includes a maximum on-resistance of 130 mOhms. Key timing specifications include a maximum turn-on time of 3 ms and a maximum idle time of 10 ms. It is housed in an SOIC-8 package and supports an operating temperature range from -20°C to +85°C.

Feature Summary

Dual-channel architecture supporting independent load switching
Integrated current limiting to protect downstream circuits
Active-low enable control for logic interface compatibility

Applications

Portable equipment power distribution
Peripheral card hot insertion protection
Battery-powered system load management

Procurement Notes

Verify the specific suffix EK against official MPS documentation to confirm package type and moisture sensitivity level. Confirm RoHS compliance status as indicated in the datasheet. Check for End-of-Life (NRND) status before finalizing design-in decisions. Ensure lead times align with production schedules due to potential supply constraints.

Selection Notes

Select this component when dual-channel isolation with current limiting is required for 3.3V or 5V rails. The low on-resistance minimizes power dissipation during normal operation. Verify that the 500mA continuous current rating meets the load requirements. Consider the SOIC-8 footprint for PCB layout compatibility.

Part Context

This part belongs to the MP62350 series of power distribution switches. It is manufactured by Monolithic Power Systems (MPS). The device is categorized under Power Switch ICs - Power Distribution. It is distinct from single-channel variants like the MP6205 or higher-current models in the same family.