N08SP008L

Inrush Current Limiters (ICL) Overview

The YAGEO N08SP008L is an NTC thermistor from the SP series, designed for PCB mount applications. It features a radial termination with a 5 mm lead spacing and bulk packaging. The component has a resistance of 8 Ohms with a tolerance of 15%, rated for 2 W power and 3 A current. Operating temperatures range from -40°C to +170°C. Physical dimensions include an 11 mm diameter and 6 mm width.

Inrush Current Limiters (ICL) Feature Summary

• Negative temperature coefficient characteristic for thermal sensing
• Radial leaded construction for printed circuit board mounting
• High-temperature stability up to 170°C

Inrush Current Limiters (ICL) Applications

• Temperature monitoring in electronic circuits
• Thermal protection systems
• Inrush current limiting components

Inrush Current Limiters (ICL) Procurement Notes

Verify RoHS compliance status through official documentation before integration. Confirm that the specific batch matches the required tolerance class of 15%. Ensure storage conditions maintain component integrity prior to soldering. Check for any regional distribution restrictions or supply limitations that may affect procurement timelines.

Inrush Current Limiters (ICL) Selection Notes

Select this model when an 8 Ohm resistance at reference conditions is required within the SP series. The 2 W power rating supports moderate thermal loads. The 15% tolerance offers standard precision for general-purpose applications. Consider the 11 mm diameter for available PCB real estate constraints.

Inrush Current Limiters (ICL) Part Context

This part belongs to the YAGEO SP series of NTC thermistors. It shares physical dimensions with other variants like N08SP008M but differs in tolerance specifications. The series provides radial leads for through-hole mounting, distinguishing it from surface-mount alternatives.

Inrush Current Limiters (ICL) Replacement Considerations

N08SP008M serves as a substitute with identical electrical and physical parameters except for a 20% tolerance instead of 15%. Verify if the looser tolerance meets the design requirements.