RF Receivers NEO-7P-0 product image

NEO-7P-0

$179.55
  • Description:RF RX GLONASS/GNSS/GPS 1.575GHZ
  • Series:NEO-7P
  • Mfr:u-blox
  • Package:Tape & Reel (TR),Cut Tape (CT)

SKU:69fae75dfa0d Category: Brand:

  
  • Quantity
    • -
    • +
  •    
ChipApex WhatsApp

Consult the customer manager about the wholesale price.

consultation hotline:86-132-6715-2157

email:[email protected]
Contact the product manager for consultation. One-stop consultation is available.


Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Submitting!
Submission successful!
Submission failed!
Email error!
Phone number error!

NEO-7P-0 is listed in the RF Receivers range at ChipApex. The manufacturer field lists u-blox. Its product description is RF RX GLONASS/GNSS/GPS 1.575GHZ. Review the specifications below when checking this part for your BOM.

RF Receivers specifications for NEO-7P-0

  • Description:RF RX GLONASS/GNSS/GPS 1.575GHZ
  • Series:NEO-7P
  • Mfr:u-blox
  • Package:Tape & Reel (TR),Cut Tape (CT)
  • Frequency:1.575GHz
  • Sensitivity:-161dBm
  • Data Rate (Max):-
  • Modulation or Protocol:GLONASS, GNSS, GPS
  • Applications:General Purpose
  • Current - Receiving:-
  • Data Interface:I2C, SPI, UART, USB
  • Memory Size:-
  • Antenna Connector:-
  • Features:-
  • Voltage - Supply:2.7V ~ 3.6V
  • Operating Temperature:-40°C ~ 85°C
  • Mounting Type:Surface Mount
  • Package / Case:24-SMD Module
  • Supplier Device Package:-
  • Grade:-
  • Qualification:-

RF Receivers datasheet and documents for NEO-7P-0

NEO-7P-0

RF Receivers Overview

The u-blox NEO-7P-0 is a compact GNSS module based on the u-blox 7 multi-GNSS engine, designed for Precise Point Positioning (PPP). It supports GPS and GLONASS constellations with L1 frequency reception. The module operates at a standard supply voltage of 3 V, with a minimum of 2.7 V and maximum of 3.6 V. It features a small form factor measuring 16 mm x 12.2 mm x 2.4 mm in an LCC package. The device supports interfaces including UART, SPI, I2C, and USB, and offers hot start acceleration capabilities.

RF Receivers Feature Summary

  • Integrates high-performance multi-GNSS engine for precise positioning
  • Supports hot start acceleration for rapid signal acquisition
  • Compact LCC package suitable for space-constrained PCB layouts

RF Receivers Applications

  • High-precision navigation systems requiring PPP
  • Compact embedded tracking devices
  • Multi-constellation receiver applications

RF Receivers Procurement Notes

Verify that the specific part number NEO-7P-0 aligns with current procurement requirements, as some sources indicate it may be classified as NRND (Not Recommended for New Designs). Confirm interface compatibility and power specifications against system constraints before ordering.

RF Receivers Selection Notes

Select this module when sub-meter accuracy via PPP is required in a small footprint. Ensure the application can accommodate L1-only reception if higher precision RTK is not needed. Verify support for required communication protocols such as NMEA or UBX.

RF Receivers Part Context

The NEO-7P-0 belongs to the u-blox 7 series, which introduced advanced multi-GNSS processing capabilities. This series focuses on balancing high precision with low power consumption, targeting professional-grade applications where size and performance are critical factors.

RF Receivers Replacement Considerations

Consider the NEO-M8N or NEO-M8T for upgraded multi-constellation support including Galileo and BeiDou, or enhanced RTK capabilities. These newer models offer improved sensitivity and broader satellite coverage compared to the 7-series architecture.

NEO-7P-0NEO-7P-0
$179.55
Buy Now

Recent News