PI49FCT3807AQ

Description：IC CLK BUFFER 1:10 66MHZ 20QSOP
Series：49FCT

SKU:4b1aaa3fafde Category: Clock Buffers, Drivers Brand: Diodes Incorporated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

PI49FCT3807AQ is listed in the Clock Buffers, Drivers range at ChipApex. The manufacturer field lists Diodes Incorporated. Its product description is IC CLK BUFFER 1:10 66MHZ 20QSOP. Review the specifications below when checking this part for your BOM.

Clock Buffers, Drivers specifications for PI49FCT3807AQ

Description：IC CLK BUFFER 1:10 66MHZ 20QSOP
Series：49FCT
Package：Tube
Mfr：Diodes Incorporated
Type：Fanout Buffer (Distribution)
Number of Circuits：1
Ratio - Input:Output：1:10
Differential - Input:Output：No/No
Input：CMOS, TTL
Output：CMOS, TTL
Frequency - Max：66 MHz
Voltage - Supply：3V ~ 3.6V
Operating Temperature：-40°C ~ 85°C
Mounting Type：Surface Mount
Package / Case：20-SSOP (0.154", 3.90mm Width)
Supplier Device Package：20-QSOP
Grade：-
Qualification：-

Clock Buffers, Drivers datasheet and documents for PI49FCT3807AQ

PI49FCT3807AQ

Clock Buffers, Drivers Overview

The PI49FCT3807AQ is a 3.3V Fast CMOS clock driver manufactured by Diodes Incorporated (formerly Pericom). It features a 1-to-10 fanout configuration with one input and ten non-inverting outputs in a 20-pin QSOP package. The device operates within a supply voltage range of 3.0V to 3.6V and supports an industrial temperature range of -40°C to +85°C. Key electrical parameters include a maximum propagation delay of 3.5ns, ultra-low skew of 0.35ns, and quiescent current of 30µA. It provides TTL-compatible inputs and CMOS outputs.

Clock Buffers, Drivers Feature Summary

1:10 fanout clock distribution with low skew (0.35ns typical)
TTL input and CMOS output compatibility
Industrial temperature range (-40°C to +85°C)
Pb-free and Green packaging

Clock Buffers, Drivers Applications

Clock and signal distribution systems
High-speed digital circuit buffering
Low noise clock generation networks

Clock Buffers, Drivers Procurement Notes

Verify the specific ordering suffix 'Q' corresponds to the 20-pin 150-mil wide QSOP package as defined in the datasheet. Confirm that the 'E' suffix indicates Pb-free and Green compliance if required for environmental standards. Ensure the speed grade matches application timing requirements.

Clock Buffers, Drivers Selection Notes

Select this component when a single clock source needs to drive up to ten loads with minimal skew. The 3.3V operation and TTL/CMOS compatibility make it suitable for mixed-voltage logic interfaces. Consider the 20-pin QSOP footprint for PCB layout constraints.

Clock Buffers, Drivers Part Context

This part belongs to the PI49FCT series of 3.3V Fast CMOS logic circuits. The 'AQ' designation specifically identifies the A-speed grade variant housed in the QSOP package. Other variants exist with different speed grades (B, C, D) and packages (SSOP, SOIC).