PS9117-V-F3-A

Logic Output Optoisolators Overview

The PS9117-V-F3-A is a high-speed optocoupler manufactured by CEL, featuring a single channel with an open collector output. It operates within a voltage range of 4.5V to 5.5V and supports data rates up to 10 Mbps. The device provides an isolation voltage of 3750Vrms and a minimum common-mode transient immunity (CMTI) of 15kV/µs. Typical propagation delays are 75ns for both low-to-high and high-to-low transitions, with rise and fall times of 20ns and 5ns respectively. It functions in temperatures from -40°C to 85°C.

Logic Output Optoisolators Feature Summary

• High-speed signal transmission capability supporting 10 Mbps data rates
• Robust noise immunity with 15kV/µs common-mode transient rejection
• Active low logic output configuration for direct interface compatibility

Logic Output Optoisolators Applications

• Industrial communication systems requiring galvanic isolation
• Microcontroller input/output isolation interfaces
• Noise-sensitive digital signal transmission environments

Logic Output Optoisolators Procurement Notes

Verify the specific suffix V-F3-A against official datasheets to confirm pinout and electrical characteristics. Confirm current availability status as distribution channels may list obsolete stock. Ensure the supplier provides valid traceability documentation. Cross-reference the manufacturer part number with Renesas Electronics records if sourcing through secondary markets. Validate package dimensions against the 5-SO specification before integration.

Logic Output Optoisolators Selection Notes

Select this component when high-speed digital isolation is required alongside strong noise immunity. The open collector output suits applications needing level shifting or wired-OR configurations. Verify that the 10 Mbps speed meets system timing requirements. Ensure the operating temperature range covers the intended environmental conditions. Check input forward current limits to design appropriate drive circuits.

Logic Output Optoisolators Part Context

This device belongs to the NEPOC series of high-speed optocouplers. It integrates a GaAlAs LED input with a photodiode and signal processing circuitry on the output side. The technology enables fast switching speeds while maintaining electrical isolation between input and output circuits. The series is designed for robust performance in electrically noisy industrial environments.

Logic Output Optoisolators Replacement Considerations

Consult official substitution guides for equivalent high-speed optocouplers. Verify pin compatibility and electrical parameters match the original design requirements. Check for updated manufacturing sources if the primary part is discontinued.