SA6DMDF100W-10

Attenuators Overview

The SA6DMDF100W-10 is a fixed attenuator manufactured by Fairview Microwave, designed for RF interconnect applications. It provides a nominal attenuation of 10 dB with a frequency range extending from 0 Hz to 6 GHz. The component features 7/16 DIN connectors, configured as a male plug to female jack interface. It operates at a characteristic impedance of 50 Ohms and supports a maximum power rating of 100 Watts. The Voltage Standing Wave Ratio (VSWR) is rated at 1.45. The unit utilizes a heatsink body construction and functions within an operating temperature range of -55°C to +125°C.

Attenuators Feature Summary

• Incorporates a heatsink body design to manage thermal loads during high-power operation.
• Provides stable signal attenuation across a broad frequency spectrum up to 6 GHz.
• Features robust 7/16 DIN connector interfaces for secure directional interconnection.

Attenuators Applications

• RF signal level reduction in communication systems
• Test and measurement equipment calibration
• Power amplifier output matching

Attenuators Procurement Notes

Verify the specific connector gender configuration and physical dimensions against system requirements before integration. Confirm that the 100 Watt power rating aligns with peak operational signals. Ensure the 7/16 DIN interface compatibility matches existing cabling infrastructure. Check for any specific environmental sealing needs if deployed outside standard indoor conditions.

Attenuators Selection Notes

Select this model when a 10 dB attenuation value is required within the 6 GHz bandwidth. The 7/16 DIN interface suits high-power applications where N-type or SMA connectors may be insufficient. Consider the heatsink body for environments requiring passive thermal management without active cooling solutions.

Attenuators Part Context

This component belongs to the Fairview Microwave series of connectorized attenuators. These devices are engineered for reliability in demanding RF environments. The product line emphasizes high power handling and consistent electrical performance across wide frequency ranges.

Attenuators Replacement Considerations

Direct substitutes must match the 10 dB attenuation, 7/16 DIN male-to-female configuration, and 100 Watt power rating. Verify VSWR specifications do not exceed 1.45 to maintain signal integrity. Ensure replacement units support the same 0 Hz to 6 GHz frequency range.