SBG1635CT-T-F

Diode Arrays Overview

The SBG1635CT-T-F is a surface mount Schottky barrier rectifier from Diodes Incorporated, rated for a peak repetitive reverse voltage of 35V and an average rectified output current of 16A. It features a low forward voltage drop of 0.55V at 8.0A per element and supports a non-repetitive peak forward surge current of 175A. The device utilizes a D2PAK case with a typical thermal resistance junction to case of 3.0°C/W and operates within a temperature range of -65°C to +125°C.

Diode Arrays Feature Summary

• Guard ring die construction provides transient protection capabilities
• Low power loss and high efficiency design suitable for high frequency applications
• High surge capability with overload rating up to 175A peak

Diode Arrays Applications

• Low voltage, high frequency inverters
• Free wheeling circuits
• Polarity protection applications

Diode Arrays Procurement Notes

Verify the component status before procurement as the datasheet explicitly marks this series as not recommended for new design. Confirm that the specific ordering suffix matches the required tape and reel packaging quantity of 800 units on a 13-inch reel. Ensure compliance with RoHS standards and check for any updated lifecycle notices from the manufacturer prior to finalizing supply agreements.

Diode Arrays Selection Notes

Select this component when a 35V blocking voltage and 16A continuous current are required in a surface mount configuration. Consider the D2PAK package for its thermal performance and mechanical robustness. Evaluate the 0.55V forward voltage drop against system efficiency targets. Verify that the operating environment stays within the specified -65°C to +125°C junction temperature range.

Diode Arrays Part Context

This part belongs to the SBG1630CT through SBG1645CT family of 16A surface mount Schottky barrier rectifiers. The series offers varying reverse voltage ratings while maintaining consistent current handling and package characteristics. These devices are designed for general purpose rectification in consumer and industrial electronics requiring high reliability and low forward voltage drops.

Diode Arrays Replacement Considerations

Check for equivalent parts within the same SBG16xxCT series if different voltage ratings are acceptable. Verify pinout compatibility with the D2PAK package. Review thermal resistance specifications to ensure adequate heat dissipation in the target application.

Diode Arrays FAQ

What is the maximum non-repetitive peak forward surge current?

The SBG1635CT-T-F supports a non-repetitive peak forward surge current of 175A for an 8.3ms single half sine-wave superimposed on rated load.

What is the typical total capacitance of the device?

The typical total capacitance is 275pF, measured at 1.0MHz and applied reverse voltage of 4.0V DC per element.

Is this component suitable for life support devices?

No, Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without express written approval.